pgstar

general options

window updates

pgstar_interval

update windows when mod(model_number,pgstar_interval) == 0 note: this replaces the obsolete control pgstar_cnt. better performance for star with this > 1. make it as large as you can while still getting adequate plot updates. Does not alter the rate at which pgplots are saved to disk, use the *_file_interval options instead.

pgstar_interval = 2

pause

if true, then after refresh windows, wait for user to hit RETURN

pause = .false.

pause_interval

if > 0, then pause when mod(model_number, pause_interval) = 0.

pause_interval = -1

pgstar_sleep

after refresh windows, sleep this long (in seconds; can be noninteger)

pgstar_sleep = 0.0

clear_history

clear_history = .false.

white_on_black flags

true means white foreground color on black background

file_white_on_black_flag

win_white_on_black_flag

file_white_on_black_flag = .true.
win_white_on_black_flag = .true.

File output

file_device

file_extension

‘png’ is Portable Network Graphics format; can also use ‘pdf’

file_device = 'png'
file_extension = 'png'

file_digits

number of digits for model_number in filenames

file_digits = 6

delta_HR_limit_for_file_output

trigger file output by distance travelled on HR diagram negative means no limit HR distance since last file output = sum of dHR where per step dHR = same definition as used for timestep limits

dHR = sqrt((delta_HR_ds_L*dlgL)**2 + (delta_HR_ds_Teff*dlgTeff)**2)
dlgL = log10(L/L_prev)
dlgTeff = log10(Teff/Teff_prev)

delta_HR_limit_for_file_output = -1

pgstar_report_writing_files = .true.

for terminal output report when write plot file

title, age, and model number

placement details scale is for character size disp, coord, fjust are args for PGMTXT

• DISP : the displacement of the character string from the specified edge of the viewport, measured outwards from the viewport in units of the character height. Use a negative value to write inside the viewport, a positive value to write outside.

• COORD : the location of the character string along the specified edge of the viewport, as a fraction of the length of the edge.

• FJUST : controls justification of the string parallel to the specified edge of the viewport. If FJUST = 0.0, the left-hand end of the string will be placed at COORD; if JUST = 0.5, the center of the string will be placed at COORD; if JUST = 1.0, the right-hand end of the string will be placed at at COORD.

model_number

pgstar_show_model_number = .true.

only shown for full window, not for subplots

pgstar_model_scale = 0.8
pgstar_model_lw = 3
pgstar_model_disp = 3.0
pgstar_model_coord = 1.01
pgstar_model_fjust = 1.0

age

pgstar_show_age = .true.

if all of those are false, then picks units based on magnitude of age

pgstar_show_age_in_seconds = .false.
pgstar_show_age_in_minutes = .false.
pgstar_show_age_in_hours = .false.
pgstar_show_age_in_days = .false.
pgstar_show_age_in_years = .false.
pgstar_show_log_age_in_years = .false.

only shown for full window, not for subplots

pgstar_age_scale = 0.8
pgstar_age_lw = 3
pgstar_age_disp = 3.0
pgstar_age_coord = -0.04
pgstar_age_fjust = 0.0

titles

these apply to all plots except grids.

pgstar_show_title = .true.
pgstar_title_scale = 1.3
pgstar_title_lw = 3
pgstar_title_disp = 1.1
pgstar_title_coord = 0.5
pgstar_title_fjust = 0.5

grid titles

these apply to the top of the grid, not to the subplots within the grid.

pgstar_grid_show_title = .true.
pgstar_grid_title_scale = 1.2
pgstar_grid_title_lw = 3
pgstar_grid_title_disp = 1.8
pgstar_grid_title_coord = 0.5
pgstar_grid_title_fjust = 0.5

scale for axis labels

pgstar_xaxis_label_scale = 1.5
pgstar_left_yaxis_label_scale = 1.5
pgstar_right_yaxis_label_scale = 1.5
pgstar_xaxis_label_lw = 4
pgstar_left_yaxis_label_lw = 4
pgstar_right_yaxis_label_lw = 4

displacements for axis labels

pgstar_xaxis_label_disp = 2.2
pgstar_left_yaxis_label_disp = 3.1
pgstar_right_yaxis_label_disp = 4.1

relative scale of axis numbers

pgstar_num_scale = 1.2

line width for axes

pgstar_box_lw = 3

line width for data

pgstar_lw = 8

pgstar_profile_line_style for profile panels plot

pgstar_history_line_style for history panels plot

Referring to the the left side plot, not the “other” one on the right

1 (full line), 2 (dashed), 3 (dot-dash-dot-dash), 4 (dotted), 5 (dash-dot-dot-dot)

pgstar_profile_line_style = 1
pgstar_history_line_style = 1

TRho Profile window

Display current model in T-Rho plane

TRho_Profile_win_flag = .false.

Window sizing

TRho_Profile_win_width = 6
TRho_Profile_win_aspect_ratio = 0.75

TRho_Profile_xleft = 0.15
TRho_Profile_xright = 0.85
TRho_Profile_ybot = 0.15
TRho_Profile_ytop = 0.85
TRho_Profile_txt_scale = 1.0
TRho_Profile_title = 'TRho_Profile'

Axis limits

TRho_Profile_xmin = -11.1
TRho_Profile_xmax = 10.2
TRho_Profile_ymin = 2.6
TRho_Profile_ymax = 10.2

If TRho_switch_to_Column_Depth = .true., replace logRho for xaxis by log column depth (g/cm^2). If TRho_switch_to_mass = .true., replace logRho for xaxis by log mass coordinate M-m(k) \({\rm M}_\odot\).

TRho_switch_to_Column_Depth = .false.
TRho_switch_to_mass = .false.

Legend

show_TRho_Profile_legend = .false.
TRho_Profile_legend_coord = 0.05
TRho_Profile_legend_fjust = 0.0
TRho_Profile_legend_disp1 = -2.0
TRho_Profile_legend_del_disp = -1.3
TRho_Profile_legend_txt_scale = 0.7

show_TRho_Profile_text_info = .false.
TRho_Profile_text_info_xfac = 0.77
TRho_Profile_text_info_dxfac = 0.02
TRho_Profile_text_info_yfac = 0.6
TRho_Profile_text_info_dyfac = -0.04

Decorators

If show_TRho_accretion_mesh_borders = .true., plots the borders of the mesh and newly accreted material in the appropriate xcoord

show_TRho_accretion_mesh_borders = .false.

The regions shown by show_TRho_Profile_kap_regions and show_TRho_Profile_eos_regions may not correspond exactly to those used in the model as they are not updated to reflect changes made in a inlist that change the boundaries between eos or kap regions.

show_TRho_Profile_kap_regions = .false.
show_TRho_Profile_eos_regions = .false.

show_TRho_Profile_gamma1_4_3rd = .false.
show_TRho_Profile_degeneracy_line = .true.
show_TRho_Profile_Pgas_Prad_line = .true.
show_TRho_Profile_burn_lines = .true.
show_TRho_Profile_burn_labels = .true.

show_TRho_Profile_annotation1 = .false.
show_TRho_Profile_annotation2 = .false.
show_TRho_Profile_annotation3 = .false.

TRho_Profile_fname = ''

TRho_Profile_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

TRho_Profile_use_decorator = .false.

File output

TRho_Profile_file_flag = .false.
TRho_Profile_file_dir = 'png'
TRho_Profile_file_prefix = 'trho_profile_'
TRho_Profile_file_interval = 5
TRho_Profile_file_width = -1
TRho_Profile_file_aspect_ratio = -1

Mass location markers

if show_TRho_Profile_mass_locs = .true., display mass location markers on TRho profile plot

show_TRho_Profile_mass_locs = .false.

Setting colors

profile_mass_point_color_index and profile_mass_point_str_clr set the color of the mass location’s symbol and corresponding string, respectively, with 1 = foreground color, 2 = Red, 3 = Green, 4 = Blue, etc. The full range of available indicies is defined in Set_Colours in pgstar.support.f.

Setting symbols and text

profile_mass_point_symbol sets the symbol to be drawn for a given marker. A selection of code numbers used to define the mass point symbol can be found in the table below. For more information about code numbers, http://www.astro.caltech.edu/~tjp/pgplot/hershey.html

-1, -2	A single dot (diameter = current line width).
-3 .. -31	A regular polygon with ABS(SYMBOL) edges (style set by current fill style).
0 .. 31	Standard marker symbols
32 .. 127	ASCII characters (in current font). e.g. to use letter F as a marker, let SYMBOL = ICHAR(‘F’).
> 127	A Hershey symbol number

profile_mass_point_str sets the text displayed with the marker.

Syntax

To set defaults for all entries:

profile_mass_point_q = -1
profile_mass_point_color_index = 1
profile_mass_point_symbol = -6
profile_mass_point_symbol_scale = 1.7
profile_mass_point_str = ''
profile_mass_point_str_clr = 1
profile_mass_point_str_scale = 1.0

To then set individual qualities of any given profile_mass_point_q(N):

num_profile_mass_points = 3

profile_mass_point_q(1) = 0.5
profile_mass_point_color_index(1) = 1
profile_mass_point_symbol(1) = -6
profile_mass_point_str(1) = '  0.5 M\d\(0844)\u'
profile_mass_point_str_clr(1) = 1

profile_mass_point_q(2) = 0.95
profile_mass_point_color_index(2) = 1
profile_mass_point_symbol(2) = -6
profile_mass_point_str(2) = '  0.95 M\d\(0844)\u'
profile_mass_point_str_clr(3) = 1

profile_mass_point_q(3) = 0.999
profile_mass_point_color_index(3) = 1
profile_mass_point_symbol(3) = -6
profile_mass_point_str(3) = '  0.999 M\d\(0844)\u'
profile_mass_point_str_clr(3) = 1

Abundance window

Display current model abundance profiles

Abundance_win_flag = .false.

Window sizing

Abundance_win_width = 6
Abundance_win_aspect_ratio = 0.75

Abundance_xleft = 0.15
Abundance_xright = 0.85
Abundance_ybot = 0.15
Abundance_ytop = 0.85
Abundance_txt_scale = 1.0
Abundance_title = 'Abundance'

Axis limits and labels

X-axis limits are set by Abundance_xmin and Abundance_xmax. Y-axis limits are set by Abundance_log_mass_frac_min and Abundance_log_mass_frac_max

Abundance_xmin = -101d0
Abundance_xmax = -101d0
Abundance_log_mass_frac_min = 101
Abundance_log_mass_frac_max = 0.3

Abundance_xaxis_name = 'mass'
Abundance_xaxis_reversed = .false.

Legend

Abundance_legend_max_cnt = 16
Abundance_legend_txt_scale_factor = 0.8

Isotope Selecton

Abundance_num_isos_to_show = -1
Abundance_which_isos_to_show(1) = 'h1'
Abundance_which_isos_to_show(2) = 'he3'
Abundance_which_isos_to_show(3) = 'he4'
Abundance_which_isos_to_show(4) = 'c12'
Abundance_which_isos_to_show(5) = 'n14'
Abundance_which_isos_to_show(6) = 'o16'

num_abundance_line_labels = 5
Abundance_line_txt_scale_factor = 0.8

Decorators

Abundance_show_photosphere_location = .false.

‘’Abundance_use_decorator`` enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

Abundance_use_decorator = .false.

File output

Abundance_file_flag = .false.
Abundance_file_dir = 'png'
Abundance_file_prefix = 'abund_'
Abundance_file_interval = 5
Abundance_file_width = -1
Abundance_file_aspect_ratio = -1

Power window

Display current model nuclear power profiles

Power_win_flag = .false.

Window Sizing

Power_win_width = 6
Power_win_aspect_ratio = 0.75

Power_xleft = 0.15
Power_xright = 0.85
Power_ybot = 0.15
Power_ytop = 0.85
Power_txt_scale = 1.0
Power_title = 'Power'

Axis limits and labels

Power_xmin = -101d0
Power_xmax = -101d0
Power_ymin = -101d0
Power_ymax = -101d0

Power_xaxis_name = 'mass'
Power_xaxis_reversed = .false.

Legend

Power_legend_max_cnt = 16
Power_legend_txt_scale_factor = 0.7

Decorators

Power_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

Power_use_decorator = .false.

File output

Power_file_flag = .false.
Power_file_dir = 'png'
Power_file_prefix = 'power_'
Power_file_interval = 5
Power_file_width = -1
Power_file_aspect_ratio = -1

Mixing window

Display current model profile of mixing diffusion coefficients

Mixing_win_flag = .false.

Window sizing

Mixing_win_width = 6
Mixing_win_aspect_ratio = 0.75

Mixing_xleft = 0.15
Mixing_xright = 0.85
Mixing_ybot = 0.15
Mixing_ytop = 0.85
Mixing_txt_scale = 1.0
Mixing_title = 'Mixing'

Axis limits and labels

Mixing_xmin = -101d0
Mixing_xmax = -101d0
Mixing_ymin = -101d0
Mixing_ymax = -101d0
Mixing_dymin = -101d0

Mixing_xaxis_name = 'mass'
Mixing_xaxis_reversed = .false.

Legend

Mixing_legend_txt_scale_factor = 1

Decorators

show_Mixing_annotation1 = .false.
show_Mixing_annotation2 = .false.
show_Mixing_annotation3 = .false.

Mixing_show_rotation_details = .true.

Mixing_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

Mixing_use_decorator = .false.

File output

Mixing_file_flag = .false.
Mixing_file_dir = 'png'
Mixing_file_prefix = 'mixing_'
Mixing_file_interval = 5
Mixing_file_width = -1
Mixing_file_aspect_ratio = -1

Dynamo window

Display current model dynamo info

Dynamo_win_flag = .false.

Window sizing

Dynamo_win_width = 6
Dynamo_win_aspect_ratio = 0.75

Dynamo_xleft = 0.15
Dynamo_xright = 0.85
Dynamo_ybot = 0.15
Dynamo_ytop = 0.85
Dynamo_txt_scale = 1.0
Dynamo_title = 'Dynamo'

Axis limits and labels

Dynamo_xmin = -101d0
Dynamo_xmax = -101d0

Dynamo_ymin_left = -101d0
Dynamo_ymax_left = -101d0
Dynamo_dymin_left = -101d0

Dynamo_ymin_right = -101d0
Dynamo_ymax_right = -101d0
Dynamo_dymin_right = -101d0

Dynamo_xaxis_name = 'mass'
Dynamo_xaxis_reversed = .false.

Legend

Dynamo_legend_txt_scale_factor = 0.7

Decorators

show_Dynamo_annotation1 = .false.
show_Dynamo_annotation2 = .false.
show_Dynamo_annotation3 = .false.

Dynamo_use_decorator enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Dynamo_use_decorator = .false.

File output

Dynamo_file_flag = .false.
Dynamo_file_dir = 'png'
Dynamo_file_prefix = 'dynamo_'
Dynamo_file_interval = 5
Dynamo_file_width = -1
Dynamo_file_aspect_ratio = -1

Mode Propagation window

for asterseismology

Mode_Prop_win_flag = .false.

Window sizing

Mode_Prop_win_width = 6
Mode_Prop_win_aspect_ratio = 0.75

Mode_Prop_xleft = 0.15
Mode_Prop_xright = 0.85
Mode_Prop_ybot = 0.15
Mode_Prop_ytop = 0.85
Mode_Prop_txt_scale = 1.0
Mode_Prop_title = 'Mode_Prop'

Axis limits and labels

Mode_Prop_xmin = -101d0
Mode_Prop_xmax = -101d0
Mode_Prop_ymin = -101d0
Mode_Prop_ymax = -101d0

Mode_Prop_xaxis_name = 'mass'
Mode_Prop_xaxis_reversed = .false.

Decorators

Mode_Prop_nu_max_obs sets the observed nu max that is plotted for comparison and can be ignored by setting the value to -999

Mode_Prop_nu_max_obs = -999

Mode_Prop_use_decorator enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Mode_Prop_use_decorator = .false.

File output

Mode_Prop_file_flag = .false.
Mode_Prop_file_dir = 'png'
Mode_Prop_file_prefix = 'mode_prop_'
Mode_Prop_file_interval = 5
Mode_Prop_file_width = -1
Mode_Prop_file_aspect_ratio = -1

Summary Burn window

Display summary of burn

Summary_Burn_win_flag = .false.

Window sizing

Summary_Burn_win_width = 6
Summary_Burn_win_aspect_ratio = 0.75

Summary_Burn_xleft = 0.15
Summary_Burn_xright = 0.85
Summary_Burn_ybot = 0.15
Summary_Burn_ytop = 0.80
Summary_Burn_txt_scale = 1.0
Summary_Burn_title = 'Summary_Burn'
Summary_Burn_title_shift = 2.5

Axis limits and labels

Summary_Burn_xmin = -101d0
Summary_Burn_xmax = -101d0

Summary_Burn_xaxis_name = 'mass'
Summary_Burn_xaxis_reversed = .false.

Decorators

Summary_Burn_use_decorator enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Summary_Burn_use_decorator = .false.

File output

Summary_Burn_file_flag = .false.
Summary_Burn_file_dir = 'png'
Summary_Burn_file_prefix = 'Summary_Burn_'
Summary_Burn_file_interval = 5
Summary_Burn_file_width = -1
Summary_Burn_file_aspect_ratio = -1

Summary Profile window

Display summary of profile

Summary_Profile_win_flag = .false.

Window sizing

Summary_Profile_win_width = 6
Summary_Profile_win_aspect_ratio = 0.75

Summary_Profile_xleft = 0.15
Summary_Profile_xright = 0.85
Summary_Profile_ybot = 0.15
Summary_Profile_ytop = 0.85
Summary_Profile_txt_scale = 1.0
Summary_Profile_title = 'Summary_Profile'

Axis limits and labels

Summary_Profile_xmin = -101d0
Summary_Profile_xmax = -101d0

Summary_Profile_xaxis_name = 'mass'
Summary_Profile_xaxis_reversed = .false.

Syntax

To set defaults for all entries:

If Summary_Profile_name(N)='', then skip it.

Summary_Profile_name(:) = ''
Summary_Profile_legend(:) = ''

If Summary_Profile_scaled_value = .true., show values scaled max to 1.0 and min to 0.0. If Summary_Profile_scaled_value = .false., show the unmapped values (which should be in range 0.0 to 1.0) typically set .false. for mass fractions; .true. for everything else.

Summary_Profile_scaled_value(:) = .true.

To then set individual qualities of any given Summary_Profile_name(N):

Summary_Profile_num_lines = 11

Summary_Profile_name(1) = 'x'
Summary_Profile_legend(1) = 'X'
Summary_Profile_scaled_value(1) = .false.

Summary_Profile_name(2) = 'y'
Summary_Profile_legend(2) = 'Y'
Summary_Profile_scaled_value(2) = .false.

Summary_Profile_name(3) = 'log_j_rot'
Summary_Profile_legend(3) = 'log j rel'

Summary_Profile_name(4) = 'log_omega'
Summary_Profile_legend(4) = 'log \(0650) rel'

Summary_Profile_name(5) = 'mass'
Summary_Profile_legend(5) = 'm rel'

Summary_Profile_name(6) = 'radius'
Summary_Profile_legend(6) = 'r rel'

Summary_Profile_name(7) = 'eps_nuc'
Summary_Profile_legend(7) = 'eps nuc rel'

Summary_Profile_name(8) = 'entropy'
Summary_Profile_legend(8) = 'entropy rel'

Summary_Profile_name(9) = 'opacity'
Summary_Profile_legend(9) = 'opacity rel'

Summary_Profile_name(10) = 'luminosity'
Summary_Profile_legend(10) = 'L rel'

Summary_Profile_name(11) = 'temperature'
Summary_Profile_legend(11) = 'T rel'

Decorators

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Summary_Profile_use_decorator = .false.

File output

Summary_Profile_file_flag = .false.
Summary_Profile_file_dir = 'png'
Summary_Profile_file_prefix = 'Summary_Profile_'
Summary_Profile_file_interval = 5
Summary_Profile_file_width = -1
Summary_Profile_file_aspect_ratio = -1

Summary History window

Display history summary

Summary_History_win_flag = .false.

Window sizing

Summary_History_win_width = 6
Summary_History_win_aspect_ratio = 0.75

Summary_History_xleft = 0.15
Summary_History_xright = 0.85
Summary_History_ybot = 0.15
Summary_History_ytop = 0.85
Summary_History_txt_scale = 1.0
Summary_History_title = 'Summary_History'

Axis limits and labels

Summary_History_xmax = -1
Summary_History_xmin = -1
Summary_History_max_width = -1

Syntax

To set defaults for all entries:

If Summary_History_name(N)='', then skip it.

Summary_History_name(:) = ''
Summary_History_legend(:) = ''

if Summary_History_scaled_value = .true., show values scaled max to 1.0 and min to 0.0 if Summary_History_scaled_value = .false., show the unmapped values (which should be in range 0.0 to 1.0) typically set .false. for mass fractions; .true. for everything else.

Summary_History_scaled_value(:) = .true.

To then set individual qualities of any given Summary_History_name(N):

Summary_History_num_lines = 7

Summary_History_name(1) = 'log_center_T'
Summary_History_legend(1) = 'log T\dc\u rel'

Summary_History_name(2) = 'log_center_Rho'
Summary_History_legend(2) = 'log Rho\dc\u rel'

Summary_History_name(3) = 'log_L'
Summary_History_legend(3) = 'log L rel'

Summary_History_name(4) = 'log_Teff'
Summary_History_legend(4) = 'log Teff rel'

Summary_History_name(5) = 'log_R'
Summary_History_legend(5) = 'log R rel'

Summary_History_name(6) = 'center_h1'
Summary_History_legend(6) = 'h1\dc\u'
Summary_History_scaled_value(6) = .false.

Summary_History_name(7) = 'center_he4'
Summary_History_legend(7) = 'he4\dc\u'
Summary_History_scaled_value(7) = .false.

Decorators

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Summary_History_use_decorator = .false.

File output

Summary_History_file_flag = .false.
Summary_History_file_dir = 'png'
Summary_History_file_prefix = 'Summary_History_'
Summary_History_file_interval = 5
Summary_History_file_width = -1
Summary_History_file_aspect_ratio = -1

“Kippenhahn” window

history of convection and more.

your history_columns.list needs to include
       star_mass
       mixing_regions 40    -- 40 can be changed if you wish
       burning_regions 80    -- 80 can be changed if you wish
and if you have set M_center > 0, then also include
       log_xmstar
if you want to show luminosities, include some or all of
       log_L, log_Lneu, log_LH, log_LHe
if you want to show mass boundaries, then include some or all of
       he_core_mass, co_core_mass, fe_core_mass

Display Kippenhahn window

Kipp_win_flag = .false.

Window sizing

Kipp_win_width = 7
Kipp_win_aspect_ratio = 0.75

Kipp_xleft = 0.15
Kipp_xright = 0.85
Kipp_ybot = 0.15
Kipp_ytop = 0.85
Kipp_txt_scale = 1.0
Kipp_title = 'Kipp'

Axis limits and labels

The options for Kipp_xaxis_name are model_number and star_age

Kipp_step_xmin = -1
Kipp_step_xmax = -1
Kipp_xaxis_name = 'model_number'

If Kipp_max_width is negative, then all steps will be shown, thereby overriding Kipp_step_xmin

Kipp_max_width = -1

Changes to Kipp_xaxis_log, Kipp_xmin, Kipp_xmax, Kipp_xmargin, Kipp_xaxis_reversed, Kipp_xaxis_in_seconds, Kipp_xaxis_in_Myr, and Kipp_xaxis_time_from_present all require Kipp_xaxis_name = star_age

Kipp_xaxis_log = .false.
Kipp_xmin = -101d0
Kipp_xmax = -101d0
Kipp_xmargin = 0.0
Kipp_xaxis_reversed = .false.
Kipp_xaxis_in_seconds = .false.
Kipp_xaxis_in_Myr = .false.

Kipp_xaxis_time_from_present plots star_age - max(star_age)

Kipp_xaxis_time_from_present = .false.

Bounds for mass Y-axis:

Kipp_mass_max = -1
Kipp_mass_min = -1
Kipp_mass_margin = 0.01

Bounds for luminosity Y-axis:

Kipp_lgL_max = -101d0
Kipp_lgL_min = -101d0
Kipp_lgL_margin = 0.1

Decorators

Kipp_show_mixing uses the mixing_regions specified in your history_columns.list. Kipp_mix_interval sets the model number step in between updates of the displayed mixing data

Kipp_show_mixing = .true.
Kipp_mix_line_weight = 10
Kipp_mix_interval = 4

Kipp_show_burn uses the burning_regions specified in your history_columns.list. Burn lines are shown only where abs(log(eps)) > Kipp_burn_type_cutoff.

Kipp_show_burn = .true.
Kipp_burn_line_weight = 14
Kipp_burn_type_cutoff = 0d0

To use Kipp_show_luminosities, include the following in your history_columns.list log_L, log_Lneu, log_LH, log_LHe

Kipp_show_luminosities = .false.
Kipp_luminosities_line_weight = 8

To use Kipp_show_mass_boundaries, include the following in your history_columns.list he_core_mass, co_core_mass, fe_core_mass

Kipp_show_mass_boundaries = .true.
Kipp_masses_line_weight = 8

show_Kipp_annotation1 = .false.
show_Kipp_annotation2 = .false.
show_Kipp_annotation3 = .false.

Kipp_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

Kipp_use_decorator = .false.

File output

Kipp_file_flag = .false.
Kipp_file_dir = 'png'
Kipp_file_prefix = 'conv_'
Kipp_file_interval = 5
Kipp_file_width = -1
Kipp_file_aspect_ratio = -1

“rti” window

history of Rayleigh Taylor instabilities.

your history_columns.list needs to include
       star_mass
       rti_regions 40    -- 40 can be changed if you wish
and if you have set M_center > 0, then also include
       log_xmstar

Display history of Rayleigh-Taylor Instability

rti_win_flag = .false.

Window sizing

rti_win_width = 7
rti_win_aspect_ratio = 0.75

rti_xleft = 0.15
rti_xright = 0.85
rti_ybot = 0.15
rti_ytop = 0.85
rti_txt_scale = 1.0
rti_title = 'Rayleigh Taylor Instability'

Axis limits and Labels

The options for rti_xaxis_name are model_number or star_age

rti_step_xmin = -1
rti_step_xmax = -1
rti_xaxis_name = 'model_number'

If rti_max_width is negative, then all steps will be shown, thereby overriding rti_step_xmin

rti_max_width = -1

Changes to rti_xaxis_log, rti_xmin, rti_xmax, rti_xmargin, rti_xaxis_reversed, rti_xaxis_in_seconds, rti_xaxis_in_Myr, and rti_xaxis_time_from_present all require rti_xaxis_name = star_age

rti_xaxis_log = .false.
rti_xmin = -101d0
rti_xmax = -101d0
rti_xmargin = 0.0
rti_xaxis_reversed = .false.
rti_xaxis_in_seconds = .false.
rti_xaxis_in_Myr = .false.

rti_xaxis_time_from_present plots star_age - max(star_age)

rti_xaxis_time_from_present = .false.

Bounds for mass Y-axis

rti_mass_max = -1
rti_mass_min = -1
rti_mass_margin = 0.01

Decorators

rti_interval sets the model number step in between updates of the displayed rti data

rti_line_weight = 10
rti_interval = 4

show_rti_annotation1 = .false.
show_rti_annotation2 = .false.
show_rti_annotation3 = .false.

rti_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

rti_use_decorator = .false.

File output

rti_file_flag = .false.
rti_file_dir = 'png'
rti_file_prefix = 'rti_'
rti_file_interval = 5
rti_file_width = -1
rti_file_aspect_ratio = -1

TRho window

Display history of central temperature vs. density

TRho_win_flag = .false.

Window Sizing

TRho_win_width = 6
TRho_win_aspect_ratio = 0.75

TRho_xleft = 0.15
TRho_xright = 0.85
TRho_ybot = 0.15
TRho_ytop = 0.85
TRho_txt_scale = 1.0
TRho_title = 'TRho'

Axis limits and labels

TRho_logT_min = -101d0
TRho_logT_max = -101d0
TRho_logRho_min = -101d0
TRho_logRho_max = -101d0

TRho_logT_margin = 0.1
TRho_logRho_margin = 0.1
TRho_logRho_dlogRho_min = -1
TRho_logT_dlogT_min = -1

TRho_step_min = -1
TRho_step_max = -1

Decorators

show_TRho_degeneracy_line = .true.

show_TRho_annotation1 = .false.
show_TRho_annotation2 = .false.
show_TRho_annotation3 = .false.

TRho_fname = ''

TRho_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

TRho_use_decorator = .false.

File output

TRho_file_flag = .false.
TRho_file_dir = 'png'
TRho_file_prefix = 'trho_'
TRho_file_interval = 5
TRho_file_width = -1
TRho_file_aspect_ratio = -1

TmaxRho window

Display history of central temperature vs. density

TmaxRho_win_flag = .false.

Window sizing

TmaxRho_win_width = 6
TmaxRho_win_aspect_ratio = 0.75

TmaxRho_xleft = 0.15
TmaxRho_xright = 0.85
TmaxRho_ybot = 0.15
TmaxRho_ytop = 0.85
TmaxRho_txt_scale = 1.0
TmaxRho_title = 'TmaxRho'

Axis limits and labels

TmaxRho_logT_min = -101d0
TmaxRho_logT_max = -101d0
TmaxRho_logRho_min = -101d0
TmaxRho_logRho_max = -101d0

TmaxRho_logT_margin = 0.1
TmaxRho_logRho_margin = 0.1
TmaxRho_logRho_dlogRho_min = -1
TmaxRho_logT_dlogT_min = -1

TmaxRho_step_min = -1
TmaxRho_step_max = -1

Decorators

show_TmaxRho_degeneracy_line = .true.

show_TmaxRho_annotation1 = .false.
show_TmaxRho_annotation2 = .false.
show_TmaxRho_annotation3 = .false.

TmaxRho_fname = ''

File output

TmaxRho_file_flag = .false.
TmaxRho_file_dir = 'png'
TmaxRho_file_prefix = 'trho_'
TmaxRho_file_interval = 5
TmaxRho_file_width = -1
TmaxRho_file_aspect_ratio = -1

HR window

Display history of lg_L vs. lg_Teff

HR_win_flag = .false.

Window sizing

HR_win_width = 6
HR_win_aspect_ratio = 0.75

HR_xleft = 0.15
HR_xright = 0.85
HR_ybot = 0.15
HR_ytop = 0.85
HR_txt_scale = 1.0
HR_title = 'HR'

Axis limits and labels

HR_logT_min = -101d0
HR_logT_max = -101d0
HR_logL_min = -101d0
HR_logL_max = -101d0

HR_logL_margin = 0.1
HR_logT_margin = 0.1
HR_dlogT_min = -1
HR_dlogL_min = -1

HR_step_min = -1
HR_step_max = -1

Decorators

show_HR_classical_instability_strip = .false.
show_HR_Mira_instability_region = .false.
show_HR_WD_instabilities = .false.

show_HR_target_box = .false.
HR_target_n_sigma = -3
HR_target_logL = 0
HR_target_logL_sigma = 0
HR_target_logT = 0
HR_target_logT_sigma = 0

show_HR_annotation1 = .false.
show_HR_annotation2 = .false.
show_HR_annotation3 = .false.

HR_fname = ''

HR_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

HR_use_decorator = .false.

File output

HR_file_flag = .false.
HR_file_dir = 'png'
HR_file_prefix = 'hr_'
HR_file_interval = 5
HR_file_width = -1
HR_file_aspect_ratio = -1

logL_Teff window

Display history of logL vs. Teff

logL_Teff_win_flag = .false.

Window sizing

logL_Teff_win_width = 6
logL_Teff_win_aspect_ratio = 0.75

logL_Teff_xleft = 0.15
logL_Teff_xright = 0.85
logL_Teff_ybot = 0.15
logL_Teff_ytop = 0.85
logL_Teff_txt_scale = 1.0
logL_Teff_title = 'logL_Teff'

Axis limits and labels

logL_Teff_logL_min = -101d0
logL_Teff_logL_max = -101d0
logL_Teff_Teff_min = -101d0
logL_Teff_Teff_max = -101d0

logL_Teff_Teff_margin = 0.1
logL_Teff_logL_margin = 0.1
logL_Teff_dTeff_min = -1
logL_Teff_dlogL_min = -1

logL_Teff_step_min = -1
logL_Teff_step_max = -1

Decorators

show_logL_Teff_target_box = .false.
logL_Teff_target_n_sigma = -3
logL_Teff_target_logL = 4.00d0
logL_Teff_target_logL_sigma = 0.06d0
logL_Teff_target_Teff = 6095d0
logL_Teff_target_Teff_sigma = 65

show_logL_Teff_annotation1 = .false.
show_logL_Teff_annotation2 = .false.
show_logL_Teff_annotation3 = .false.

logL_Teff_fname = ''

logL_Teff_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

logL_Teff_use_decorator = .false.

File output

logL_Teff_file_flag = .false.
logL_Teff_file_dir = 'png'
logL_Teff_file_prefix = 'logL_Teff_'
logL_Teff_file_interval = 5
logL_Teff_file_width = -1
logL_Teff_file_aspect_ratio = -1

logL_R window

Display history of logL vs. R

logL_R_win_flag = .false.

Window sizing

logL_R_win_width = 6
logL_R_win_aspect_ratio = 0.75

logL_R_xleft = 0.15
logL_R_xright = 0.85
logL_R_ybot = 0.15
logL_R_ytop = 0.85
logL_R_txt_scale = 1.0
logL_R_title = 'logL_R'

Axis limits and labels

logL_R_logL_min = -101d0
logL_R_logL_max = -101d0
logL_R_R_min = -101d0
logL_R_R_max = -101d0

logL_R_R_margin = 0.1
logL_R_logL_margin = 0.1
logL_R_dR_min = -1
logL_R_dlogL_min = -1

logL_R_step_min = -1
logL_R_step_max = -1

Decorators

show_logL_photosphere_r = .false.

show_logL_R_target_box = .false.
logL_R_target_n_sigma = -3
logL_R_target_logL = 4.00d0
logL_R_target_logL_sigma = 0.06d0
logL_R_target_R = 6095d0
logL_R_target_R_sigma = 65

show_logL_R_annotation1 = .false.
show_logL_R_annotation2 = .false.
show_logL_R_annotation3 = .false.

logL_R_fname = ''

logL_R_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

logL_R_use_decorator = .false.

File output

logL_R_file_flag = .false.
logL_R_file_dir = 'png'
logL_R_file_prefix = 'logL_R_'
logL_R_file_interval = 5
logL_R_file_width = -1
logL_R_file_aspect_ratio = -1

logL_v window

Display history of logL vs. v surface or photosphere

logL_v_win_flag = .false.

Window sizing

logL_v_win_width = 6
logL_v_win_aspect_ratio = 0.75

logL_v_xleft = 0.15
logL_v_xright = 0.85
logL_v_ybot = 0.15
logL_v_ytop = 0.85
logL_v_txt_scale = 1.0
logL_v_title = 'logL_v'

Axis limits and labels

logL_v_logL_min = -101d0
logL_v_logL_max = -101d0
logL_v_v_min = -101d0
logL_v_v_max = -101d0

logL_v_v_margin = 0.1
logL_v_logL_margin = 0.1
logL_v_dv_min = -1
logL_v_dlogL_min = -1

logL_v_step_min = -1
logL_v_step_max = -1

Decorators

show_logL_photosphere_v = .false.

show_logL_v_target_box = .false.
logL_v_target_n_sigma = -3
logL_v_target_logL = 4.00d0
logL_v_target_logL_sigma = 0.06d0
logL_v_target_v = 6095d0
logL_v_target_v_sigma = 65

show_logL_v_annotation1 = .false.
show_logL_v_annotation2 = .false.
show_logL_v_annotation3 = .false.

logL_v_fname = ''

logl_v_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

logl_v_use_decorator = .false.

File output

logL_v_file_flag = .false.
logL_v_file_dir = 'png'
logL_v_file_prefix = 'logL_v_'
logL_v_file_interval = 5
logL_v_file_width = -1
logL_v_file_aspect_ratio = -1

L_Teff window

Display history of L vs. Teff

L_Teff_win_flag = .false.

Window sizing

L_Teff_win_width = 6
L_Teff_win_aspect_ratio = 0.75

L_Teff_xleft = 0.15
L_Teff_xright = 0.85
L_Teff_ybot = 0.15
L_Teff_ytop = 0.85
L_Teff_txt_scale = 1.0
L_Teff_title = 'L_Teff'

Axis limits and labels

L_Teff_L_min = -101d0
L_Teff_L_max = -101d0
L_Teff_Teff_min = -101d0
L_Teff_Teff_max = -101d0

L_Teff_Teff_margin = 0.1
L_Teff_L_margin = 0.1
L_Teff_dTeff_min = -1
L_Teff_dL_min = -1

L_Teff_step_min = -1
L_Teff_step_max = -1

Decorators

show_L_Teff_target_box = .false.
L_Teff_target_n_sigma = -3
L_Teff_target_L = 4.00d0
L_Teff_target_L_sigma = 0.06d0
L_Teff_target_Teff = 6095d0
L_Teff_target_Teff_sigma = 65

show_L_Teff_annotation1 = .false.
show_L_Teff_annotation2 = .false.
show_L_Teff_annotation3 = .false.

L_Teff_fname = ''

L_Teff_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

L_Teff_use_decorator = .false.

File output

L_Teff_file_flag = .false.
L_Teff_file_dir = 'png'
L_Teff_file_prefix = 'L_Teff_'
L_Teff_file_interval = 5
L_Teff_file_width = -1
L_Teff_file_aspect_ratio = -1

L_v window

Display history of L vs. surface velocity

L_v_win_flag = .false.

Window sizing

L_v_win_width = 6
L_v_win_aspect_ratio = 0.75

L_v_xleft = 0.15
L_v_xright = 0.85
L_v_ybot = 0.15
L_v_ytop = 0.85
L_v_txt_scale = 1.0
L_v_title = 'L_v'

Axis limits and labels

L_v_L_min = -101d0
L_v_L_max = -101d0
L_v_v_min = -101d0
L_v_v_max = -101d0

L_v_v_margin = 0.1
L_v_L_margin = 0.1
L_v_dv_min = -1
L_v_dL_min = -1

L_v_step_min = -1
L_v_step_max = -1

Decorators

show_L_v_target_box = .false.
L_v_target_n_sigma = -3
L_v_target_L = 4.00d0
L_v_target_L_sigma = 0.06d0
L_v_target_v = 6095d0
L_v_target_v_sigma = 65

show_L_v_annotation1 = .false.
show_L_v_annotation2 = .false.
show_L_v_annotation3 = .false.

L_v_fname = ''

L_v_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

L_v_use_decorator = .false.

File output

L_v_file_flag = .false.
L_v_file_dir = 'png'
L_v_file_prefix = 'L_v_'
L_v_file_interval = 5
L_v_file_width = -1
L_v_file_aspect_ratio = -1

L_R window

Display history of L vs. R

L_R_win_flag = .false.

Window sizing

L_R_win_width = 6
L_R_win_aspect_ratio = 0.75

L_R_xleft = 0.15
L_R_xright = 0.85
L_R_ybot = 0.15
L_R_ytop = 0.85
L_R_txt_scale = 1.0
L_R_title = 'L_R'

Axis limits and labels

L_R_L_min = -101d0
L_R_L_max = -101d0
L_R_R_min = -101d0
L_R_R_max = -101d0

L_R_R_margin = 0.1
L_R_L_margin = 0.1
L_R_dR_min = -1
L_R_dL_min = -1

L_R_step_min = -1
L_R_step_max = -1

Decorators

show_L_R_target_box = .false.
L_R_target_n_sigma = -3
L_R_target_L = 4.00d0
L_R_target_L_sigma = 0.06d0
L_R_target_R = 6095d0
L_R_target_R_sigma = 65

show_L_R_annotation1 = .false.
show_L_R_annotation2 = .false.
show_L_R_annotation3 = .false.

L_R_fname = ''

L_R_use_decorator Enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

L_R_use_decorator = .false.

File output

L_R_file_flag = .false.
L_R_file_dir = 'png'
L_R_file_prefix = 'L_R_'
L_R_file_interval = 5
L_R_file_width = -1
L_R_file_aspect_ratio = -1

R_Teff window

Display history of R vs. Teff

R_Teff_win_flag = .false.

Window sizing

R_Teff_win_width = 6
R_Teff_win_aspect_ratio = 0.75

R_Teff_xleft = 0.15
R_Teff_xright = 0.85
R_Teff_ybot = 0.15
R_Teff_ytop = 0.85
R_Teff_txt_scale = 1.0
R_Teff_title = 'R_Teff'

Axis limits and labels

R_Teff_R_min = -101d0
R_Teff_R_max = -101d0
R_Teff_Teff_min = -101d0
R_Teff_Teff_max = -101d0

R_Teff_Teff_margin = 0.1
R_Teff_R_margin = 0.1
R_Teff_dTeff_min = -1
R_Teff_dR_min = -1

R_Teff_step_min = -1
R_Teff_step_max = -1

Decorators

show_R_Teff_target_box = .false.
R_Teff_target_n_sigma = -3
R_Teff_target_R = 4.00d0
R_Teff_target_R_sigma = 0.06d0
R_Teff_target_Teff = 6095d0
R_Teff_target_Teff_sigma = 65

show_R_Teff_annotation1 = .false.
show_R_Teff_annotation2 = .false.
show_R_Teff_annotation3 = .false.

R_Teff_fname = ''

R_Teff_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

R_Teff_use_decorator = .false.

File output

R_Teff_file_flag = .false.
R_Teff_file_dir = 'png'
R_Teff_file_prefix = 'R_Teff_'
R_Teff_file_interval = 5
R_Teff_file_width = -1
R_Teff_file_aspect_ratio = -1

R_L window

Display history of R vs. L

R_L_win_flag = .false.

Window sizing

R_L_win_width = 6
R_L_win_aspect_ratio = 0.75

R_L_xleft = 0.15
R_L_xright = 0.85
R_L_ybot = 0.15
R_L_ytop = 0.85
R_L_txt_scale = 1.0
R_L_title = 'R_L'

Axis limits and labels

R_L_R_min = -101d0
R_L_R_max = -101d0
R_L_L_min = -101d0
R_L_L_max = -101d0

R_L_L_margin = 0.1
R_L_R_margin = 0.1
R_L_dL_min = -1
R_L_dR_min = -1

R_L_step_min = -1
R_L_step_max = -1

Decorators

show_R_L_target_box = .false.
R_L_target_n_sigma = -3
R_L_target_R = 4.00d0
R_L_target_R_sigma = 0.06d0
R_L_target_L = 6095d0
R_L_target_L_sigma = 65

show_R_L_annotation1 = .false.
show_R_L_annotation2 = .false.
show_R_L_annotation3 = .false.

R_L_fname = ''

R_L_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

R_L_use_decorator = .false.

File output

R_L_file_flag = .false.
R_L_file_dir = 'png'
R_L_file_prefix = 'R_L_'
R_L_file_interval = 5
R_L_file_width = -1
R_L_file_aspect_ratio = -1

logg_Teff window

Display history of logg vs. Teff

logg_Teff_win_flag = .false.

Window sizing

logg_Teff_win_width = 6
logg_Teff_win_aspect_ratio = 0.75

logg_Teff_xleft = 0.15
logg_Teff_xright = 0.85
logg_Teff_ybot = 0.15
logg_Teff_ytop = 0.85
logg_Teff_txt_scale = 1.0
logg_Teff_title = 'logg_Teff'

Axis limits and labels

logg_Teff_logg_min = -101d0
logg_Teff_logg_max = -101d0
logg_Teff_Teff_min = -101d0
logg_Teff_Teff_max = -101d0

logg_Teff_Teff_margin = 0.1
logg_Teff_logg_margin = 0.1
logg_Teff_dTeff_min = -1
logg_Teff_dlogg_min = -1

logg_Teff_step_min = -1
logg_Teff_step_max = -1

Decorators

show_logg_Teff_target_box = .false.
logg_Teff_target_n_sigma = -3
logg_Teff_target_logg = 4.00d0
logg_Teff_target_logg_sigma = 0.06d0
logg_Teff_target_Teff = 6095d0
logg_Teff_target_Teff_sigma = 65

show_logg_Teff_annotation1 = .false.
show_logg_Teff_annotation2 = .false.
show_logg_Teff_annotation3 = .false.

logg_Teff_fname = ''

logg_Teff_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

logg_Teff_use_decorator = .false.

File output

logg_Teff_file_flag = .false.
logg_Teff_file_dir = 'png'
logg_Teff_file_prefix = 'logg_Teff_'
logg_Teff_file_interval = 5
logg_Teff_file_width = -1
logg_Teff_file_aspect_ratio = -1

logg_logT window

Display history of logg vs. log Teff

logg_logT_win_flag = .false.

Window sizing

logg_logT_win_width = 6
logg_logT_win_aspect_ratio = 0.75

logg_logT_xleft = 0.15
logg_logT_xright = 0.85
logg_logT_ybot = 0.15
logg_logT_ytop = 0.85
logg_logT_txt_scale = 1.0
logg_logT_title = 'logg_logT'

Axis limits and labels

logg_logT_logg_min = -101d0
logg_logT_logg_max = -101d0
logg_logT_logT_min = -101d0
logg_logT_logT_max = -101d0

logg_logT_logg_margin = 0.1
logg_logT_logT_margin = 0.1
logg_logT_dlogT_min = -1
logg_logT_dlogg_min = -1

logg_logT_step_min = -1
logg_logT_step_max = -1

Decorators

show_logg_logT_target_box = .false.
logg_logT_target_n_sigma = -3
logg_logT_target_logg = 4.00d0
logg_logT_target_logg_sigma = 0.06d0
logg_logT_target_logT = 3.785d0
logg_logT_target_logT_sigma = 0.00461d0

show_logg_logT_annotation1 = .false.
show_logg_logT_annotation2 = .false.
show_logg_logT_annotation3 = .false.

logg_logT_fname = ''

logg_logT_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

logg_logT_use_decorator = .false.

File output

logg_logT_file_flag = .false.
logg_logT_file_dir = 'png'
logg_logT_file_prefix = 'logg_logT_'
logg_logT_file_interval = 5
logg_logT_file_width = -1
logg_logT_file_aspect_ratio = -1

dPg_dnu window

Display delta_Pg vs. delta_nu (for asteroseismology)

dPg_dnu_win_flag = .false.

Window sizing

dPg_dnu_win_width = 6
dPg_dnu_win_aspect_ratio = 0.75

dPg_dnu_xleft = 0.15
dPg_dnu_xright = 0.85
dPg_dnu_ybot = 0.15
dPg_dnu_ytop = 0.85
dPg_dnu_txt_scale = 1.0
dPg_dnu_title = 'dPg_dnu'

Axis limits and labels

dPg_dnu_delta_nu_min = -101d0
dPg_dnu_delta_nu_max = -101d0
dPg_dnu_delta_Pg_min = -101d0
dPg_dnu_delta_Pg_max = -101d0

dPg_dnu_delta_nu_margin = 0.1
dPg_dnu_delta_Pg_margin = 0.1
dPg_dnu_d_delta_nu_min = -1
dPg_dnu_d_delta_Pg_min = -1

dPg_dnu_step_min = -1
dPg_dnu_step_max = -1

Decorators

show_dPg_dnu_annotation1 = .false.
show_dPg_dnu_annotation2 = .false.
show_dPg_dnu_annotation3 = .false.

dPg_dnu_fname = ''

dPg_dnu_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

dPg_dnu_use_decorator = .false.

File output

dPg_dnu_file_flag = .false.
dPg_dnu_file_dir = 'png'
dPg_dnu_file_prefix = 'dPg_dnu_'
dPg_dnu_file_interval = 5
dPg_dnu_file_width = -1
dPg_dnu_file_aspect_ratio = -1

Network window

Shows N vs Z for isotopes in current net

Network_win_flag = .false.

Window sizing

Network_win_width = 6
Network_win_aspect_ratio = 0.75

Network_xleft = 0.15
Network_xright = 0.85
Network_ybot = 0.15
Network_ytop = 0.85
Network_txt_scale = 1.0
Network_title = 'Network'

Axis limits and labels

Network_nmin = -101d0
Network_nmax = -101d0
Network_zmin = -101d0
Network_zmax = -101d0

Decorators

If Network_show_mass_fraction = .true., then show mass fraction as a coloured square. The mass fractions shown are limited by Network_log_mass_frac_min and Network_log_mass_frac_max.

Network_show_mass_fraction = .true.
Network_log_mass_frac_min = -5.0d0
Network_log_mass_frac_max = 0.0d0

Use Network_show_element_names to label Y-axis with element name and Network_show_colorbar to add a color bar.

Network_show_element_names = .true.
Network_show_colorbar = .true.

Network_use_decorator enables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

Network_use_decorator = .false.

File output

Network_file_flag = .false.
Network_file_dir = 'png'
Network_file_prefix = 'Network_'
Network_file_interval = 5
Network_file_width = -1
Network_file_aspect_ratio = -1

Production window

Plots the abundance for each stable isotope divided by the initial stable composition

Production_win_flag = .false.

Window sizing

Production_win_width = 6
Production_win_aspect_ratio = 0.75

Production_xleft = 0.15
Production_xright = 0.85
Production_ybot = 0.15
Production_ytop = 0.85
Production_txt_scale = 1.0
Production_title = 'Production'

Axis limits and labels

Production_amin = -101d0
Production_amax = -101d0
Production_ymin = -101d0
Production_ymax = -101d0

Mass range of star to show

Production_min_mass = -101d0
Production_max_mass = -101d0

Min log mass fraction an isotope must have to be shown

Production_min_mass_frac = -5.0d0

Decorators

Add labels with element names

Production_show_element_names = .true.

Production_use_decorator nables calling a subroutine to add extra information to a plot, see $MESA_DIR/star/other/pgstar_decorator.f90

Production_use_decorator = .false.

File output

Production_file_flag = .false.
Production_file_dir = 'png'
Production_file_prefix = 'Production_'
Production_file_interval = 5
Production_file_width = -1
Production_file_aspect_ratio = -1

Profile Panels

for tracking shocks

Profile_Panels_show_Mach_1_location = .false.
Profile_Panels_show_photosphere_location = .false.
Profile_Panels_xwidth_left_of_shock = -1
Profile_Panels_xwidth_right_of_shock = -1
Profile_Panels_xwidth_left_div_shock_value = -1
Profile_Panels_xwidth_right_div_shock_value = -1

these apply to all Profile Panels plots don’t use if value is <= 0 else put location of shock at center of xaxis, and set xmin and xmax so that (xmax - xmin)/center_value = this.

Profile_Panels1

Profile_Panels1_win_flag = .false.

Window sizing

Profile_Panels1_win_width = 6
Profile_Panels1_win_aspect_ratio = 0.75

Profile_Panels1_xleft = 0.15
Profile_Panels1_xright = 0.85
Profile_Panels1_ybot = 0.15
Profile_Panels1_ytop = 0.85
Profile_Panels1_txt_scale = 1.0
Profile_Panels1_title = 'Profile Panels1'

Profile_Panels1_xaxis_name = 'mass'
Profile_Panels1_xaxis_reversed = .false.
Profile_Panels1_xmin = -101d0
Profile_Panels1_xmax = -101d0
Profile_Panels1_xmargin = 0d0
Profile_Panels1_show_mix_regions_on_xaxis = .false.

Profile_Panels1_same_yaxis_range(:) = .false.

Profile_Panels1_yaxis_name(:) = ''
Profile_Panels1_yaxis_reversed(:) = .false.
Profile_Panels1_yaxis_log(:) = .false.
Profile_Panels1_ymin(:) = -101d0
Profile_Panels1_ymax(:) = -101d0
Profile_Panels1_ycenter(:) = -101d0
Profile_Panels1_ymargin(:) = 0.1
Profile_Panels1_dymin(:) = -1

Profile_Panels1_other_yaxis_name(:) = ''
Profile_Panels1_other_yaxis_reversed(:) = .false.
Profile_Panels1_other_yaxis_log(:) = .false.
Profile_Panels1_other_ymin(:) = -101d0
Profile_Panels1_other_ymax(:) = -101d0
Profile_Panels1_other_ycenter(:) = -101d0
Profile_Panels1_other_ymargin(:) = 0.1
Profile_Panels1_other_dymin(:) = -1

Profile_Panels1_show_grid = .false.

setup default plot

Profile_Panels1_num_panels = 2
Profile_Panels1_yaxis_name(1) = 'logT'
Profile_Panels1_other_yaxis_name(1) = 'entropy'
Profile_Panels1_yaxis_name(2) = 'logRho'
Profile_Panels1_other_yaxis_name(2) = 'logP'

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels1_use_decorator = .false.

File output

Profile_Panels1_file_flag = .false.
Profile_Panels1_file_dir = 'png'
Profile_Panels1_file_prefix = 'profile_panels1_'
Profile_Panels1_file_interval = 5
Profile_Panels1_file_width = -1
Profile_Panels1_file_aspect_ratio = -1

Profile_Panels2

Profile_Panels2_win_flag = .false.

Window sizing

Profile_Panels2_win_width = 6
Profile_Panels2_win_aspect_ratio = 0.75

Profile_Panels2_xleft = 0.15
Profile_Panels2_xright = 0.85
Profile_Panels2_ybot = 0.15
Profile_Panels2_ytop = 0.85
Profile_Panels2_txt_scale = 1.0
Profile_Panels2_title = 'Profile Panels2'

Profile_Panels2_xaxis_name = ''
Profile_Panels2_xaxis_reversed = .false.
Profile_Panels2_xmin = -101d0
Profile_Panels2_xmax = -101d0
Profile_Panels2_xmargin = 0d0
Profile_Panels2_show_mix_regions_on_xaxis = .false.

Profile_Panels2_same_yaxis_range(:) = .false.

Profile_Panels2_num_panels = 0

Profile_Panels2_yaxis_name(:) = ''
Profile_Panels2_yaxis_reversed(:) = .false.
Profile_Panels2_yaxis_log(:) = .false.
Profile_Panels2_ymin(:) = -101d0
Profile_Panels2_ymax(:) = -101d0
Profile_Panels2_ycenter(:) = -101d0
Profile_Panels2_ymargin(:) = 0.1
Profile_Panels2_dymin(:) = -1

Profile_Panels2_other_yaxis_name(:) = ''
Profile_Panels2_other_yaxis_reversed(:) = .false.
Profile_Panels2_other_yaxis_log(:) = .false.
Profile_Panels2_other_ymin(:) = -101d0
Profile_Panels2_other_ymax(:) = -101d0
Profile_Panels2_other_ycenter(:) = -101d0
Profile_Panels2_other_ymargin(:) = 0.1
Profile_Panels2_other_dymin(:) = -1

Profile_Panels2_show_grid = .false.

setup default plot

Profile_Panels2_win_aspect_ratio = 1.25
Profile_Panels2_txt_scale = 0.9
Profile_Panels2_ybot = 0.1
Profile_Panels2_ytop = 0.9
Profile_Panels2_title = 'Abundance-Power'

Profile_Panels2_xaxis_name = 'logP'
Profile_Panels2_xaxis_reversed = .true.

Profile_Panels2_num_panels = 2
Profile_Panels2_yaxis_name(1) = 'Abundance'
Profile_Panels2_yaxis_name(2) = 'Power'

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels2_use_decorator = .false.

File output

Profile_Panels2_file_flag = .false.
Profile_Panels2_file_dir = 'png'
Profile_Panels2_file_prefix = 'profile_Panels2_'
Profile_Panels2_file_interval = 5
Profile_Panels2_file_width = -1
Profile_Panels2_file_aspect_ratio = -1

Profile_Panels3

Profile_Panels3_win_flag = .false.

Window sizing

Profile_Panels3_win_width = 6
Profile_Panels3_win_aspect_ratio = 0.75

Profile_Panels3_xleft = 0.15
Profile_Panels3_xright = 0.85
Profile_Panels3_ybot = 0.15
Profile_Panels3_ytop = 0.85
Profile_Panels3_txt_scale = 1.0
Profile_Panels3_title = 'Profile Panels3'

Profile_Panels3_xaxis_name = ''
Profile_Panels3_xaxis_reversed = .false.
Profile_Panels3_xmin = -101d0
Profile_Panels3_xmax = -101d0
Profile_Panels3_xmargin = 0d0
Profile_Panels3_show_mix_regions_on_xaxis = .false.

Profile_Panels3_same_yaxis_range(:) = .false.

Profile_Panels3_num_panels = 0

Profile_Panels3_yaxis_name(:) = ''
Profile_Panels3_yaxis_reversed(:) = .false.
Profile_Panels3_yaxis_log(:) = .false.
Profile_Panels3_ymin(:) = -101d0
Profile_Panels3_ymax(:) = -101d0
Profile_Panels3_ycenter(:) = -101d0
Profile_Panels3_ymargin(:) = 0.1
Profile_Panels3_dymin(:) = -1

Profile_Panels3_other_yaxis_name(:) = ''
Profile_Panels3_other_yaxis_reversed(:) = .false.
Profile_Panels3_other_yaxis_log(:) = .false.
Profile_Panels3_other_ymin(:) = -101d0
Profile_Panels3_other_ymax(:) = -101d0
Profile_Panels3_other_ycenter(:) = -101d0
Profile_Panels3_other_ymargin(:) = 0.1
Profile_Panels3_other_dymin(:) = -1

Profile_Panels3_show_grid = .false.

setup default plot

Profile_Panels3_win_aspect_ratio = 1.25
Profile_Panels3_txt_scale = 0.9
Profile_Panels3_ybot = 0.1
Profile_Panels3_ytop = 0.9
Profile_Panels3_title = 'Abundance-Power-Mixing'

Profile_Panels3_xaxis_name = 'logP'
Profile_Panels3_xaxis_reversed = .true.

Profile_Panels3_num_panels = 3
Profile_Panels3_yaxis_name(1) = 'Abundance'
Profile_Panels3_yaxis_name(2) = 'Power'
Profile_Panels3_yaxis_name(3) = 'Mixing'

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels3_use_decorator = .false.

File output

Profile_Panels3_file_flag = .false.
Profile_Panels3_file_dir = 'png'
Profile_Panels3_file_prefix = 'profile_Panels3_'
Profile_Panels3_file_interval = 5
Profile_Panels3_file_width = -1
Profile_Panels3_file_aspect_ratio = -1

Profile_Panels4

Profile_Panels4_win_flag = .false.

Window sizing

Profile_Panels4_win_width = 6
Profile_Panels4_win_aspect_ratio = 0.75

Profile_Panels4_xleft = 0.15
Profile_Panels4_xright = 0.85
Profile_Panels4_ybot = 0.15
Profile_Panels4_ytop = 0.85
Profile_Panels4_txt_scale = 1.0
Profile_Panels4_title = 'Profile Panels4'

Profile_Panels4_xaxis_name = ''
Profile_Panels4_xaxis_reversed = .false.
Profile_Panels4_xmin = -101d0
Profile_Panels4_xmax = -101d0
Profile_Panels4_xmargin = 0d0
Profile_Panels4_show_mix_regions_on_xaxis = .false.

Profile_Panels4_num_panels = 0

Profile_Panels4_yaxis_name(:) = ''
Profile_Panels4_yaxis_reversed(:) = .false.
Profile_Panels4_yaxis_log(:) = .false.
Profile_Panels4_ymin(:) = -101d0
Profile_Panels4_ymax(:) = -101d0
Profile_Panels4_ycenter(:) = -101d0
Profile_Panels4_ymargin(:) = 0.1
Profile_Panels4_dymin(:) = -1

Profile_Panels4_other_yaxis_name(:) = ''
Profile_Panels4_other_yaxis_reversed(:) = .false.
Profile_Panels4_other_yaxis_log(:) = .false.
Profile_Panels4_other_ymin(:) = -101d0
Profile_Panels4_other_ymax(:) = -101d0
Profile_Panels4_other_ycenter(:) = -101d0
Profile_Panels4_other_ymargin(:) = 0.1
Profile_Panels4_other_dymin(:) = -1

Profile_Panels4_show_grid = .false.

setup default plot

Profile_Panels4_win_aspect_ratio = 1.25
Profile_Panels4_txt_scale = 0.9
Profile_Panels4_ybot = 0.1
Profile_Panels4_ytop = 0.9
Profile_Panels4_title = 'Abundance-Power-Mixing-Dynamo'

Profile_Panels4_xaxis_name = 'logP'
Profile_Panels4_xaxis_reversed = .true.

Profile_Panels4_num_panels = 4
Profile_Panels4_yaxis_name(1) = 'Abundance'
Profile_Panels4_yaxis_name(2) = 'Power'
Profile_Panels4_yaxis_name(3) = 'Mixing'
Profile_Panels4_yaxis_name(4) = 'Dynamo'

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels4_use_decorator = .false.

File output

Profile_Panels4_file_flag = .false.
Profile_Panels4_file_dir = 'png'
Profile_Panels4_file_prefix = 'profile_Panels4_'
Profile_Panels4_file_interval = 5
Profile_Panels4_file_width = -1
Profile_Panels4_file_aspect_ratio = -1

Profile_Panels5

Profile_Panels5_win_flag = .false.

Window sizing

Profile_Panels5_win_width = 5
Profile_Panels5_win_aspect_ratio = 0.75

Profile_Panels5_xleft = 0.15
Profile_Panels5_xright = 0.85
Profile_Panels5_ybot = 0.15
Profile_Panels5_ytop = 0.85
Profile_Panels5_txt_scale = 1.0
Profile_Panels5_title = 'Profile Panels5'

Profile_Panels5_xaxis_name = ''
Profile_Panels5_xaxis_reversed = .false.
Profile_Panels5_xmin = -101d0
Profile_Panels5_xmax = -101d0
Profile_Panels5_xmargin = 0d0
Profile_Panels5_show_mix_regions_on_xaxis = .false.

Profile_Panels5_same_yaxis_range(:) = .false.

Profile_Panels5_num_panels = 0

Profile_Panels5_yaxis_name(:) = ''
Profile_Panels5_yaxis_reversed(:) = .false.
Profile_Panels5_yaxis_log(:) = .false.
Profile_Panels5_ymin(:) = -101d0
Profile_Panels5_ymax(:) = -101d0
Profile_Panels5_ycenter(:) = -101d0
Profile_Panels5_ymargin(:) = 0.1
Profile_Panels5_dymin(:) = -1

Profile_Panels5_other_yaxis_name(:) = ''
Profile_Panels5_other_yaxis_reversed(:) = .false.
Profile_Panels5_other_yaxis_log(:) = .false.
Profile_Panels5_other_ymin(:) = -101d0
Profile_Panels5_other_ymax(:) = -101d0
Profile_Panels5_other_ycenter(:) = -101d0
Profile_Panels5_other_ymargin(:) = 0.1
Profile_Panels5_other_dymin(:) = -1

Profile_Panels5_show_grid = .false.

setup default plot

Profile_Panels5_win_aspect_ratio = 1.25
Profile_Panels5_txt_scale = 0.9
Profile_Panels5_ybot = 0.1
Profile_Panels5_ytop = 0.9
Profile_Panels5_title = 'Summary Profile-Mode Prop-Mixing'

Profile_Panels5_xaxis_name = 'logP'
Profile_Panels5_xaxis_reversed = .true.

Profile_Panels5_num_panels = 3
Profile_Panels5_yaxis_name(1) = 'Summary_Profile'
Profile_Panels5_yaxis_name(2) = 'Mode_Prop'
Profile_Panels5_yaxis_name(3) = 'Mixing'

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels5_use_decorator = .false.

File output

Profile_Panels5_file_flag = .false.
Profile_Panels5_file_dir = 'png'
Profile_Panels5_file_prefix = 'profile_Panels5_'
Profile_Panels5_file_interval = 5
Profile_Panels5_file_width = -1
Profile_Panels5_file_aspect_ratio = -1

Profile_Panels6

Profile_Panels6_win_flag = .false.

Window sizing

Profile_Panels6_win_width = 6
Profile_Panels6_win_aspect_ratio = 0.75

Profile_Panels6_xleft = 0.15
Profile_Panels6_xright = 0.85
Profile_Panels6_ybot = 0.15
Profile_Panels6_ytop = 0.85
Profile_Panels6_txt_scale = 1.0
Profile_Panels6_title = 'Profile Panels6'

Profile_Panels6_xaxis_name = ''
Profile_Panels6_xaxis_reversed = .false.
Profile_Panels6_xmin = -101d0
Profile_Panels6_xmax = -101d0
Profile_Panels6_xmargin = 0d0
Profile_Panels6_show_mix_regions_on_xaxis = .false.

Profile_Panels6_same_yaxis_range(:) = .false.

Profile_Panels6_num_panels = 0

Profile_Panels6_yaxis_name(:) = ''
Profile_Panels6_yaxis_reversed(:) = .false.
Profile_Panels6_yaxis_log(:) = .false.
Profile_Panels6_ymin(:) = -101d0
Profile_Panels6_ymax(:) = -101d0
Profile_Panels6_ycenter(:) = -101d0
Profile_Panels6_ymargin(:) = 0.1
Profile_Panels6_dymin(:) = -1

Profile_Panels6_other_yaxis_name(:) = ''
Profile_Panels6_other_yaxis_reversed(:) = .false.
Profile_Panels6_other_yaxis_log(:) = .false.
Profile_Panels6_other_ymin(:) = -101d0
Profile_Panels6_other_ymax(:) = -101d0
Profile_Panels6_other_ycenter(:) = -101d0
Profile_Panels6_other_ymargin(:) = 0.1
Profile_Panels6_other_dymin(:) = -1

Profile_Panels6_show_grid = .false.

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels6_use_decorator = .false.

File output

Profile_Panels6_file_flag = .false.
Profile_Panels6_file_dir = 'png'
Profile_Panels6_file_prefix = 'profile_Panels6_'
Profile_Panels6_file_interval = 5
Profile_Panels6_file_width = -1
Profile_Panels6_file_aspect_ratio = -1

Profile_Panels7

Profile_Panels7_win_flag = .false.

Window sizing

Profile_Panels7_win_width = 6
Profile_Panels7_win_aspect_ratio = 0.75

Profile_Panels7_xleft = 0.15
Profile_Panels7_xright = 0.85
Profile_Panels7_ybot = 0.15
Profile_Panels7_ytop = 0.85
Profile_Panels7_txt_scale = 1.0
Profile_Panels7_title = 'Profile Panels7'

Profile_Panels7_xaxis_name = ''
Profile_Panels7_xaxis_reversed = .false.
Profile_Panels7_xmin = -101d0
Profile_Panels7_xmax = -101d0
Profile_Panels7_xmargin = 0d0
Profile_Panels7_show_mix_regions_on_xaxis = .false.

Profile_Panels7_same_yaxis_range(:) = .false.

Profile_Panels7_num_panels = 0

Profile_Panels7_yaxis_name(:) = ''
Profile_Panels7_yaxis_reversed(:) = .false.
Profile_Panels7_yaxis_log(:) = .false.
Profile_Panels7_ymin(:) = -101d0
Profile_Panels7_ymax(:) = -101d0
Profile_Panels7_ycenter(:) = -101d0
Profile_Panels7_ymargin(:) = 0.1
Profile_Panels7_dymin(:) = -1

Profile_Panels7_other_yaxis_name(:) = ''
Profile_Panels7_other_yaxis_reversed(:) = .false.
Profile_Panels7_other_yaxis_log(:) = .false.
Profile_Panels7_other_ymin(:) = -101d0
Profile_Panels7_other_ymax(:) = -101d0
Profile_Panels7_other_ycenter(:) = -101d0
Profile_Panels7_other_ymargin(:) = 0.1
Profile_Panels7_other_dymin(:) = -1

Profile_Panels7_show_grid = .false.

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels7_use_decorator = .false.

File output

Profile_Panels7_file_flag = .false.
Profile_Panels7_file_dir = 'png'
Profile_Panels7_file_prefix = 'profile_Panels7_'
Profile_Panels7_file_interval = 5
Profile_Panels7_file_width = -1
Profile_Panels7_file_aspect_ratio = -1

Profile_Panels8

Profile_Panels8_win_flag = .false.

Window sizing

Profile_Panels8_win_width = 6
Profile_Panels8_win_aspect_ratio = 0.75

Profile_Panels8_xleft = 0.15
Profile_Panels8_xright = 0.85
Profile_Panels8_ybot = 0.15
Profile_Panels8_ytop = 0.85
Profile_Panels8_txt_scale = 1.0
Profile_Panels8_title = 'Profile Panels8'

Profile_Panels8_xaxis_name = ''
Profile_Panels8_xaxis_reversed = .false.
Profile_Panels8_xmin = -101d0
Profile_Panels8_xmax = -101d0
Profile_Panels8_xmargin = 0d0
Profile_Panels8_show_mix_regions_on_xaxis = .false.

Profile_Panels8_same_yaxis_range(:) = .false.

Profile_Panels8_num_panels = 0

Profile_Panels8_yaxis_name(:) = ''
Profile_Panels8_yaxis_reversed(:) = .false.
Profile_Panels8_yaxis_log(:) = .false.
Profile_Panels8_ymin(:) = -101d0
Profile_Panels8_ymax(:) = -101d0
Profile_Panels8_ycenter(:) = -101d0
Profile_Panels8_ymargin(:) = 0.1
Profile_Panels8_dymin(:) = -1

Profile_Panels8_other_yaxis_name(:) = ''
Profile_Panels8_other_yaxis_reversed(:) = .false.
Profile_Panels8_other_yaxis_log(:) = .false.
Profile_Panels8_other_ymin(:) = -101d0
Profile_Panels8_other_ymax(:) = -101d0
Profile_Panels8_other_ycenter(:) = -101d0
Profile_Panels8_other_ymargin(:) = 0.1
Profile_Panels8_other_dymin(:) = -1

Profile_Panels8_show_grid = .false.

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels8_use_decorator = .false.

File output

Profile_Panels8_file_flag = .false.
Profile_Panels8_file_dir = 'png'
Profile_Panels8_file_prefix = 'profile_Panels8_'
Profile_Panels8_file_interval = 5
Profile_Panels8_file_width = -1
Profile_Panels8_file_aspect_ratio = -1

Profile_Panels9

Profile_Panels9_win_flag = .false.

Window sizing

Profile_Panels9_win_width = 6
Profile_Panels9_win_aspect_ratio = 0.75

Profile_Panels9_xleft = 0.15
Profile_Panels9_xright = 0.85
Profile_Panels9_ybot = 0.15
Profile_Panels9_ytop = 0.85
Profile_Panels9_txt_scale = 1.0
Profile_Panels9_title = 'Profile Panels9'

Profile_Panels9_xaxis_name = ''
Profile_Panels9_xaxis_reversed = .false.
Profile_Panels9_xmin = -101d0
Profile_Panels9_xmax = -101d0
Profile_Panels9_xmargin = 0d0
Profile_Panels9_show_mix_regions_on_xaxis = .false.

Profile_Panels9_same_yaxis_range(:) = .false.

Profile_Panels9_num_panels = 0

Profile_Panels9_yaxis_name(:) = ''
Profile_Panels9_yaxis_reversed(:) = .false.
Profile_Panels9_yaxis_log(:) = .false.
Profile_Panels9_ymin(:) = -101d0
Profile_Panels9_ymax(:) = -101d0
Profile_Panels9_ycenter(:) = -101d0
Profile_Panels9_ymargin(:) = 0.1
Profile_Panels9_dymin(:) = -1

Profile_Panels9_other_yaxis_name(:) = ''
Profile_Panels9_other_yaxis_reversed(:) = .false.
Profile_Panels9_other_yaxis_log(:) = .false.
Profile_Panels9_other_ymin(:) = -101d0
Profile_Panels9_other_ymax(:) = -101d0
Profile_Panels9_other_ycenter(:) = -101d0
Profile_Panels9_other_ymargin(:) = 0.1
Profile_Panels9_other_dymin(:) = -1

Profile_Panels9_show_grid = .false.

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Profile_Panels9_use_decorator = .false.

File output

Profile_Panels9_file_flag = .false.
Profile_Panels9_file_dir = 'png'
Profile_Panels9_file_prefix = 'profile_Panels9_'
Profile_Panels9_file_interval = 5
Profile_Panels9_file_width = -1
Profile_Panels9_file_aspect_ratio = -1

History Tracks

History_Track1

History_Track1_win_flag = .false.
History_Track1_win_width = 6
History_Track1_win_aspect_ratio = 0.75

History_Track1_xleft = 0.15
History_Track1_xright = 0.85
History_Track1_ybot = 0.15
History_Track1_ytop = 0.85
History_Track1_txt_scale = 1.0
History_Track1_title = 'History_Track1'

set default

History_Track1_xname = 'log_center_T'
History_Track1_yname = 'log_L'
History_Track1_xaxis_label = 'log T\dcenter'
History_Track1_yaxis_label = 'log L/L\d\(2281)'
History_Track1_reverse_xaxis = .true.
History_Track1_reverse_yaxis = .false.
History_Track1_log_xaxis = .false.
History_Track1_log_yaxis = .false.

History_Track1_xmin = -101d0
History_Track1_xmax = -101d0
History_Track1_ymin = -101d0
History_Track1_ymax = -101d0

History_Track1_xmargin = 0.1
History_Track1_ymargin = 0.1
History_Track1_dxmin = -1
History_Track1_dymin = -1

History_Track1_step_min = -1
History_Track1_step_max = -1

show_History_Track1_target_box = .false.
History_Track1_n_sigma = -3
History_Track1_xtarget = 0
History_Track1_xsigma = 0
History_Track1_ytarget = 0
History_Track1_ysigma = 0

show_History_Track1_annotation1 = .false.
show_History_Track1_annotation2 = .false.
show_History_Track1_annotation3 = .false.

History_Track1_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track1_use_decorator = .false.

File output

History_Track1_file_flag = .false.
History_Track1_file_dir = 'png'
History_Track1_file_prefix = 'track1_'
History_Track1_file_interval = 5
History_Track1_file_width = -1
History_Track1_file_aspect_ratio = -1

History_Track2

History_Track2_win_flag = .false.
History_Track2_win_width = 6
History_Track2_win_aspect_ratio = 0.75

History_Track2_xleft = 0.15
History_Track2_xright = 0.85
History_Track2_ybot = 0.15
History_Track2_ytop = 0.85
History_Track2_txt_scale = 1.0
History_Track2_title = 'History_Track2'

History_Track2_xname = ''
History_Track2_yname = ''
History_Track2_xaxis_label = ''
History_Track2_yaxis_label = ''
History_Track2_reverse_xaxis = .false.
History_Track2_reverse_yaxis = .false.
History_Track2_log_xaxis = .false.
History_Track2_log_yaxis = .false.

History_Track2_xmin = -101d0
History_Track2_xmax = -101d0
History_Track2_ymin = -101d0
History_Track2_ymax = -101d0

History_Track2_xmargin = 0.1
History_Track2_ymargin = 0.1
History_Track2_dxmin = -1
History_Track2_dymin = -1

History_Track2_step_min = -1
History_Track2_step_max = -1

show_History_Track2_target_box = .false.
History_Track2_n_sigma = -3
History_Track2_xtarget = 0
History_Track2_xsigma = 0
History_Track2_ytarget = 0
History_Track2_ysigma = 0

show_History_Track2_annotation1 = .false.
show_History_Track2_annotation2 = .false.
show_History_Track2_annotation3 = .false.

History_Track2_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track2_use_decorator = .false.

File output

History_Track2_file_flag = .false.
History_Track2_file_dir = 'png'
History_Track2_file_prefix = 'track2_'
History_Track2_file_interval = 5
History_Track2_file_width = -1
History_Track2_file_aspect_ratio = -1

History_Track3

History_Track3_win_flag = .false.
History_Track3_win_width = 6
History_Track3_win_aspect_ratio = 0.75

History_Track3_xleft = 0.15
History_Track3_xright = 0.85
History_Track3_ybot = 0.15
History_Track3_ytop = 0.85
History_Track3_txt_scale = 1.0
History_Track3_title = 'History_Track3'

History_Track3_xname = ''
History_Track3_yname = ''
History_Track3_xaxis_label = ''
History_Track3_yaxis_label = ''
History_Track3_reverse_xaxis = .false.
History_Track3_reverse_yaxis = .false.
History_Track3_log_xaxis = .false.
History_Track3_log_yaxis = .false.

History_Track3_xmin = -101d0
History_Track3_xmax = -101d0
History_Track3_ymin = -101d0
History_Track3_ymax = -101d0

History_Track3_xmargin = 0.1
History_Track3_ymargin = 0.1
History_Track3_dxmin = -1
History_Track3_dymin = -1

History_Track3_step_min = -1
History_Track3_step_max = -1

show_History_Track3_target_box = .false.
History_Track3_n_sigma = -3
History_Track3_xtarget = 0
History_Track3_xsigma = 0
History_Track3_ytarget = 0
History_Track3_ysigma = 0

show_History_Track3_annotation1 = .false.
show_History_Track3_annotation2 = .false.
show_History_Track3_annotation3 = .false.

History_Track3_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track3_use_decorator = .false.

File output

History_Track3_file_flag = .false.
History_Track3_file_dir = 'png'
History_Track3_file_prefix = 'track3_'
History_Track3_file_interval = 5
History_Track3_file_width = -1
History_Track3_file_aspect_ratio = -1

History_Track4

History_Track4_win_flag = .false.
History_Track4_win_width = 6
History_Track4_win_aspect_ratio = 0.75

History_Track4_xleft = 0.15
History_Track4_xright = 0.85
History_Track4_ybot = 0.15
History_Track4_ytop = 0.85
History_Track4_txt_scale = 1.0
History_Track4_title = 'History_Track4'

History_Track4_xname = ''
History_Track4_yname = ''
History_Track4_xaxis_label = ''
History_Track4_yaxis_label = ''
History_Track4_reverse_xaxis = .false.
History_Track4_reverse_yaxis = .false.
History_Track4_log_xaxis = .false.
History_Track4_log_yaxis = .false.

History_Track4_xmin = -101d0
History_Track4_xmax = -101d0
History_Track4_ymin = -101d0
History_Track4_ymax = -101d0

History_Track4_xmargin = 0.1
History_Track4_ymargin = 0.1
History_Track4_dxmin = -1
History_Track4_dymin = -1

History_Track4_step_min = -1
History_Track4_step_max = -1

show_History_Track4_target_box = .false.
History_Track4_n_sigma = -3
History_Track4_xtarget = 0
History_Track4_xsigma = 0
History_Track4_ytarget = 0
History_Track4_ysigma = 0

show_History_Track4_annotation1 = .false.
show_History_Track4_annotation2 = .false.
show_History_Track4_annotation3 = .false.

History_Track4_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track4_use_decorator = .false.

File output

History_Track4_file_flag = .false.
History_Track4_file_dir = 'png'
History_Track4_file_prefix = 'track4_'
History_Track4_file_interval = 5
History_Track4_file_width = -1
History_Track4_file_aspect_ratio = -1

History_Track5

History_Track5_win_flag = .false.
History_Track5_win_width = 6
History_Track5_win_aspect_ratio = 0.75

History_Track5_xleft = 0.15
History_Track5_xright = 0.85
History_Track5_ybot = 0.15
History_Track5_ytop = 0.85
History_Track5_txt_scale = 1.0
History_Track5_title = 'History_Track5'

History_Track5_xname = ''
History_Track5_yname = ''
History_Track5_xaxis_label = ''
History_Track5_yaxis_label = ''
History_Track5_reverse_xaxis = .false.
History_Track5_reverse_yaxis = .false.
History_Track5_log_xaxis = .false.
History_Track5_log_yaxis = .false.

History_Track5_xmin = -101d0
History_Track5_xmax = -101d0
History_Track5_ymin = -101d0
History_Track5_ymax = -101d0

History_Track5_xmargin = 0.1
History_Track5_ymargin = 0.1
History_Track5_dxmin = -1
History_Track5_dymin = -1

History_Track5_step_min = -1
History_Track5_step_max = -1

show_History_Track5_target_box = .false.
History_Track5_n_sigma = -3
History_Track5_xtarget = 0
History_Track5_xsigma = 0
History_Track5_ytarget = 0
History_Track5_ysigma = 0

show_History_Track5_annotation1 = .false.
show_History_Track5_annotation2 = .false.
show_History_Track5_annotation3 = .false.

History_Track5_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track5_use_decorator = .false.

File output

History_Track5_file_flag = .false.
History_Track5_file_dir = 'png'
History_Track5_file_prefix = 'track5_'
History_Track5_file_interval = 5
History_Track5_file_width = -1
History_Track5_file_aspect_ratio = -1

History_Track6

History_Track6_win_flag = .false.
History_Track6_win_width = 6
History_Track6_win_aspect_ratio = 0.75

History_Track6_xleft = 0.15
History_Track6_xright = 0.85
History_Track6_ybot = 0.15
History_Track6_ytop = 0.85
History_Track6_txt_scale = 1.0
History_Track6_title = 'History_Track6'

History_Track6_xname = ''
History_Track6_yname = ''
History_Track6_xaxis_label = ''
History_Track6_yaxis_label = ''
History_Track6_reverse_xaxis = .false.
History_Track6_reverse_yaxis = .false.
History_Track6_log_xaxis = .false.
History_Track6_log_yaxis = .false.

History_Track6_xmin = -101d0
History_Track6_xmax = -101d0
History_Track6_ymin = -101d0
History_Track6_ymax = -101d0

History_Track6_xmargin = 0.1
History_Track6_ymargin = 0.1
History_Track6_dxmin = -1
History_Track6_dymin = -1

History_Track6_step_min = -1
History_Track6_step_max = -1

show_History_Track6_target_box = .false.
History_Track6_n_sigma = -3
History_Track6_xtarget = 0
History_Track6_xsigma = 0
History_Track6_ytarget = 0
History_Track6_ysigma = 0

show_History_Track6_annotation1 = .false.
show_History_Track6_annotation2 = .false.
show_History_Track6_annotation3 = .false.

History_Track6_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track6_use_decorator = .false.

File output

History_Track6_file_flag = .false.
History_Track6_file_dir = 'png'
History_Track6_file_prefix = 'track6_'
History_Track6_file_interval = 5
History_Track6_file_width = -1
History_Track6_file_aspect_ratio = -1

History_Track7

History_Track7_win_flag = .false.
History_Track7_win_width = 6
History_Track7_win_aspect_ratio = 0.75

History_Track7_xleft = 0.15
History_Track7_xright = 0.85
History_Track7_ybot = 0.15
History_Track7_ytop = 0.85
History_Track7_txt_scale = 1.0
History_Track7_title = 'History_Track7'

History_Track7_xname = ''
History_Track7_yname = ''
History_Track7_xaxis_label = ''
History_Track7_yaxis_label = ''
History_Track7_reverse_xaxis = .false.
History_Track7_reverse_yaxis = .false.
History_Track7_log_xaxis = .false.
History_Track7_log_yaxis = .false.

History_Track7_xmin = -101d0
History_Track7_xmax = -101d0
History_Track7_ymin = -101d0
History_Track7_ymax = -101d0

History_Track7_xmargin = 0.1
History_Track7_ymargin = 0.1
History_Track7_dxmin = -1
History_Track7_dymin = -1

History_Track7_step_min = -1
History_Track7_step_max = -1

show_History_Track7_target_box = .false.
History_Track7_n_sigma = -3
History_Track7_xtarget = 0
History_Track7_xsigma = 0
History_Track7_ytarget = 0
History_Track7_ysigma = 0

show_History_Track7_annotation1 = .false.
show_History_Track7_annotation2 = .false.
show_History_Track7_annotation3 = .false.

History_Track7_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track7_use_decorator = .false.

File output

History_Track7_file_flag = .false.
History_Track7_file_dir = 'png'
History_Track7_file_prefix = 'track7_'
History_Track7_file_interval = 5
History_Track7_file_width = -1
History_Track7_file_aspect_ratio = -1

History_Track8

History_Track8_win_flag = .false.
History_Track8_win_width = 6
History_Track8_win_aspect_ratio = 0.75

History_Track8_xleft = 0.15
History_Track8_xright = 0.85
History_Track8_ybot = 0.15
History_Track8_ytop = 0.85
History_Track8_txt_scale = 1.0
History_Track8_title = 'History_Track8'

History_Track8_xname = ''
History_Track8_yname = ''
History_Track8_xaxis_label = ''
History_Track8_yaxis_label = ''
History_Track8_reverse_xaxis = .false.
History_Track8_reverse_yaxis = .false.
History_Track8_log_xaxis = .false.
History_Track8_log_yaxis = .false.

History_Track8_xmin = -101d0
History_Track8_xmax = -101d0
History_Track8_ymin = -101d0
History_Track8_ymax = -101d0

History_Track8_xmargin = 0.1
History_Track8_ymargin = 0.1
History_Track8_dxmin = -1
History_Track8_dymin = -1

History_Track8_step_min = -1
History_Track8_step_max = -1

show_History_Track8_target_box = .false.
History_Track8_n_sigma = -3
History_Track8_xtarget = 0
History_Track8_xsigma = 0
History_Track8_ytarget = 0
History_Track8_ysigma = 0

show_History_Track8_annotation1 = .false.
show_History_Track8_annotation2 = .false.
show_History_Track8_annotation3 = .false.

History_Track8_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track8_use_decorator = .false.

File output

History_Track8_file_flag = .false.
History_Track8_file_dir = 'png'
History_Track8_file_prefix = 'track8_'
History_Track8_file_interval = 5
History_Track8_file_width = -1
History_Track8_file_aspect_ratio = -1

History_Track9

History_Track9_win_flag = .false.
History_Track9_win_width = 6
History_Track9_win_aspect_ratio = 0.75

History_Track9_xleft = 0.15
History_Track9_xright = 0.85
History_Track9_ybot = 0.15
History_Track9_ytop = 0.85
History_Track9_txt_scale = 1.0
History_Track9_title = 'History_Track9'

History_Track9_xname = ''
History_Track9_yname = ''
History_Track9_xaxis_label = ''
History_Track9_yaxis_label = ''
History_Track9_reverse_xaxis = .false.
History_Track9_reverse_yaxis = .false.
History_Track9_log_xaxis = .false.
History_Track9_log_yaxis = .false.

History_Track9_xmin = -101d0
History_Track9_xmax = -101d0
History_Track9_ymin = -101d0
History_Track9_ymax = -101d0

History_Track9_xmargin = 0.1
History_Track9_ymargin = 0.1
History_Track9_dxmin = -1
History_Track9_dymin = -1

History_Track9_step_min = -1
History_Track9_step_max = -1

show_History_Track9_target_box = .false.
History_Track9_n_sigma = -3
History_Track9_xtarget = 0
History_Track9_xsigma = 0
History_Track9_ytarget = 0
History_Track9_ysigma = 0

show_History_Track9_annotation1 = .false.
show_History_Track9_annotation2 = .false.
show_History_Track9_annotation3 = .false.

History_Track9_fname = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Track9_use_decorator = .false.

File output

History_Track9_file_flag = .false.
History_Track9_file_dir = 'png'
History_Track9_file_prefix = 'track9_'
History_Track9_file_interval = 5
History_Track9_file_width = -1
History_Track9_file_aspect_ratio = -1

History Panels

History_Panels1

History_Panels1_win_flag = .false.

History_Panels1_win_width = 6
History_Panels1_win_aspect_ratio = 0.75

History_Panels1_xleft = 0.15
History_Panels1_xright = 0.85
History_Panels1_ybot = 0.15
History_Panels1_ytop = 0.85
History_Panels1_txt_scale = 1.0
History_Panels1_title = 'History_Panels1'

History_Panels1_xaxis_name = 'model_number'
History_Panels1_xmin = -101d0
History_Panels1_xmax = -101d0
History_Panels1_max_width = 100
History_Panels1_dxmin = -1
History_Panels1_xaxis_reversed = .false.
History_Panels1_xaxis_log = .false.
History_Panels1_xmargin = 0.0
History_Panels1_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels1_same_yaxis_range(:) = .false.

History_Panels1_yaxis_name(:) = ''
History_Panels1_yaxis_reversed(:) = .false.
History_Panels1_yaxis_log(:) = .false.
History_Panels1_ymin(:) = -101d0
History_Panels1_ymax(:) = -101d0
History_Panels1_ymargin(:) = 0.1
History_Panels1_dymin(:) = -1

History_Panels1_other_yaxis_name(:) = ''
History_Panels1_other_yaxis_reversed(:) = .false.
History_Panels1_other_yaxis_log(:) = .false.
History_Panels1_other_ymin(:) = -101d0
History_Panels1_other_ymax(:) = -101d0
History_Panels1_other_ymargin(:) = 0.1
History_Panels1_other_dymin(:) = -1

History_Panels1_points_name(:) = ''

setup default

History_Panels1_num_panels = 3

History_Panels1_yaxis_name(1) = 'log_center_T'
History_Panels1_yaxis_reversed(1) = .false.
History_Panels1_ymin(1) = -101d0
History_Panels1_ymax(1) = -101d0
History_Panels1_dymin(1) = -1

History_Panels1_other_yaxis_name(1) = 'log_center_Rho'
History_Panels1_other_yaxis_reversed(1) = .false.
History_Panels1_other_ymin(1) = -101d0
History_Panels1_other_ymax(1) = -101d0
History_Panels1_other_dymin(1) = -1

History_Panels1_yaxis_name(2) = 'log_L'
History_Panels1_yaxis_reversed(2) = .false.
History_Panels1_ymin(2) = -101d0
History_Panels1_ymax(2) = -101d0
History_Panels1_dymin(2) = -1

History_Panels1_other_yaxis_name(2) = 'log_Teff'
History_Panels1_other_yaxis_reversed(2) = .false.
History_Panels1_other_ymin(2) = -101d0
History_Panels1_other_ymax(2) = -101d0
History_Panels1_other_dymin(2) = -1

History_Panels1_yaxis_name(3) = 'star_mass'
History_Panels1_yaxis_reversed(3) = .false.
History_Panels1_ymin(3) = -101d0
History_Panels1_ymax(3) = -101d0
History_Panels1_dymin(3) = -1

History_Panels1_other_yaxis_name(3) = 'log_abs_mdot'
History_Panels1_other_yaxis_reversed(3) = .false.
History_Panels1_other_ymin(3) = -101d0
History_Panels1_other_ymax(3) = -101d0
History_Panels1_other_dymin(3) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels1_use_decorator = .false.

File output

History_Panels1_file_flag = .false.
History_Panels1_file_dir = 'png'
History_Panels1_file_prefix = 'History_Panels1_'
History_Panels1_file_interval = 5
History_Panels1_file_width = -1
History_Panels1_file_aspect_ratio = -1

History_Panels2

History_Panels2_win_flag = .false.

History_Panels2_win_width = 6
History_Panels2_win_aspect_ratio = 0.75

History_Panels2_xleft = 0.15
History_Panels2_xright = 0.85
History_Panels2_ybot = 0.15
History_Panels2_ytop = 0.85
History_Panels2_txt_scale = 1.0
History_Panels2_title = 'History_Panels2'

History_Panels2_xaxis_name = 'model_number'
History_Panels2_xmin = -101d0
History_Panels2_xmax = -101d0
History_Panels2_max_width = 100
History_Panels2_dxmin = -1
History_Panels2_xaxis_reversed = .false.
History_Panels2_xaxis_log = .false.
History_Panels2_xmargin = 0.0
History_Panels2_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels2_same_yaxis_range(:) = .false.

History_Panels2_num_panels = 0

History_Panels2_yaxis_name(:) = ''
History_Panels2_yaxis_reversed(:) = .false.
History_Panels2_yaxis_log(:) = .false.
History_Panels2_ymin(:) = -101d0
History_Panels2_ymax(:) = -101d0
History_Panels2_ymargin(:) = 0.1
History_Panels2_dymin(:) = -1

History_Panels2_other_yaxis_name(:) = ''
History_Panels2_other_yaxis_reversed(:) = .false.
History_Panels2_other_yaxis_log(:) = .false.
History_Panels2_other_ymin(:) = -101d0
History_Panels2_other_ymax(:) = -101d0
History_Panels2_other_ymargin(:) = 0.1
History_Panels2_other_dymin(:) = -1

History_Panels2_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels2_use_decorator = .false.

File output

History_Panels2_file_flag = .false.
History_Panels2_file_dir = 'png'
History_Panels2_file_prefix = 'History_Panels2_'
History_Panels2_file_interval = 5
History_Panels2_file_width = -1
History_Panels2_file_aspect_ratio = -1

History_Panels3

History_Panels3_win_flag = .false.

History_Panels3_win_width = 6
History_Panels3_win_aspect_ratio = 0.75

History_Panels3_xleft = 0.15
History_Panels3_xright = 0.85
History_Panels3_ybot = 0.15
History_Panels3_ytop = 0.85
History_Panels3_txt_scale = 1.0
History_Panels3_title = 'History_Panels3'

History_Panels3_xaxis_name = 'model_number'
History_Panels3_xmin = -101d0
History_Panels3_xmax = -101d0
History_Panels3_max_width = 100
History_Panels3_dxmin = -1
History_Panels3_xaxis_reversed = .false.
History_Panels3_xaxis_log = .false.
History_Panels3_xmargin = 0.0
History_Panels3_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels3_same_yaxis_range(:) = .false.

History_Panels3_num_panels = 0

History_Panels3_yaxis_name(:) = ''
History_Panels3_yaxis_reversed(:) = .false.
History_Panels3_yaxis_log(:) = .false.
History_Panels3_ymin(:) = -101d0
History_Panels3_ymax(:) = -101d0
History_Panels3_ymargin(:) = 0.1
History_Panels3_dymin(:) = -1

History_Panels3_other_yaxis_name(:) = ''
History_Panels3_other_yaxis_reversed(:) = .false.
History_Panels3_other_yaxis_log(:) = .false.
History_Panels3_other_ymin(:) = -101d0
History_Panels3_other_ymax(:) = -101d0
History_Panels3_other_ymargin(:) = 0.1
History_Panels3_other_dymin(:) = -1

History_Panels3_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels3_use_decorator = .false.

File output

History_Panels3_file_flag = .false.
History_Panels3_file_dir = 'png'
History_Panels3_file_prefix = 'History_Panels3_'
History_Panels3_file_interval = 5
History_Panels3_file_width = -1
History_Panels3_file_aspect_ratio = -1

History_Panels4

History_Panels4_win_flag = .false.

History_Panels4_win_width = 6
History_Panels4_win_aspect_ratio = 0.75

History_Panels4_xleft = 0.15
History_Panels4_xright = 0.85
History_Panels4_ybot = 0.15
History_Panels4_ytop = 0.85
History_Panels4_txt_scale = 1.0
History_Panels4_title = 'History_Panels4'

History_Panels4_xaxis_name = 'model_number'
History_Panels4_xmin = -101d0
History_Panels4_xmax = -101d0
History_Panels4_max_width = 100
History_Panels4_dxmin = -1
History_Panels4_xaxis_reversed = .false.
History_Panels4_xaxis_log = .false.

History_Panels4_num_panels = 0

History_Panels4_yaxis_name(:) = ''
History_Panels4_yaxis_reversed(:) = .false.
History_Panels4_yaxis_log(:) = .false.
History_Panels4_ymin(:) = -101d0
History_Panels4_ymax(:) = -101d0
History_Panels4_ymargin(:) = 0.1
History_Panels4_dymin(:) = -1
History_Panels4_xmargin = 0.0
History_Panels4_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels4_same_yaxis_range(:) = .false.

History_Panels4_other_yaxis_name(:) = ''
History_Panels4_other_yaxis_reversed(:) = .false.
History_Panels4_other_yaxis_log(:) = .false.
History_Panels4_other_ymin(:) = -101d0
History_Panels4_other_ymax(:) = -101d0
History_Panels4_other_ymargin(:) = 0.1
History_Panels4_other_dymin(:) = -1

History_Panels4_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels4_use_decorator = .false.

File output

History_Panels4_file_flag = .false.
History_Panels4_file_dir = 'png'
History_Panels4_file_prefix = 'History_Panels4_'
History_Panels4_file_interval = 5
History_Panels4_file_width = -1
History_Panels4_file_aspect_ratio = -1

History_Panels5

History_Panels5_win_flag = .false.

History_Panels5_win_width = 6
History_Panels5_win_aspect_ratio = 0.75

History_Panels5_xleft = 0.15
History_Panels5_xright = 0.85
History_Panels5_ybot = 0.15
History_Panels5_ytop = 0.85
History_Panels5_txt_scale = 1.0
History_Panels5_title = 'History_Panels5'

History_Panels5_xaxis_name = 'model_number'
History_Panels5_xmin = -101d0
History_Panels5_xmax = -101d0
History_Panels5_max_width = 100
History_Panels5_dxmin = -1
History_Panels5_xaxis_reversed = .false.
History_Panels5_xaxis_log = .false.
History_Panels5_xmargin = 0.0
History_Panels5_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels5_same_yaxis_range(:) = .false.

History_Panels5_num_panels = 0

History_Panels5_yaxis_name(1) = 'num_zones'
History_Panels5_yaxis_reversed(1) = .false.
History_Panels5_ymin(1) = -101d0
History_Panels5_ymax(1) = -101d0
History_Panels5_dymin(1) = -1

History_Panels5_yaxis_name(:) = ''
History_Panels5_yaxis_reversed(:) = .false.
History_Panels5_yaxis_log(:) = .false.
History_Panels5_ymin(:) = -101d0
History_Panels5_ymax(:) = -101d0
History_Panels5_ymargin(:) = 0.1
History_Panels5_dymin(:) = -1

History_Panels5_other_yaxis_name(:) = ''
History_Panels5_other_yaxis_reversed(:) = .false.
History_Panels6_other_yaxis_log(:) = .false.
History_Panels5_other_ymin(:) = -101d0
History_Panels5_other_ymax(:) = -101d0
History_Panels5_other_ymargin(:) = 0.1
History_Panels5_other_dymin(:) = -1

History_Panels5_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels5_use_decorator = .false.

File output

History_Panels5_file_flag = .false.
History_Panels5_file_dir = 'png'
History_Panels5_file_prefix = 'History_Panels5_'
History_Panels5_file_interval = 5
History_Panels5_file_width = -1
History_Panels5_file_aspect_ratio = -1

History_Panels6

History_Panels6_win_flag = .false.

History_Panels6_win_width = 6
History_Panels6_win_aspect_ratio = 0.75

History_Panels6_xleft = 0.15
History_Panels6_xright = 0.85
History_Panels6_ybot = 0.15
History_Panels6_ytop = 0.85
History_Panels6_txt_scale = 1.0
History_Panels6_title = 'History_Panels6'

History_Panels6_xaxis_name = 'model_number'
History_Panels6_xmin = -101d0
History_Panels6_xmax = -101d0
History_Panels6_max_width = 100
History_Panels6_dxmin = -1
History_Panels6_xaxis_reversed = .false.
History_Panels6_xaxis_log = .false.
History_Panels6_xmargin = 0.0
History_Panels6_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels6_same_yaxis_range(:) = .false.

History_Panels6_num_panels = 0

History_Panels6_yaxis_name(:) = ''
History_Panels6_yaxis_reversed(:) = .false.
History_Panels6_yaxis_log(:) = .false.
History_Panels6_ymin(:) = -101d0
History_Panels6_ymax(:) = -101d0
History_Panels6_ymargin(:) = 0.1
History_Panels6_dymin(:) = -1

History_Panels6_other_yaxis_name(:) = ''
History_Panels6_other_yaxis_reversed(:) = .false.
History_Panels6_other_yaxis_log(:) = .false.
History_Panels6_other_ymin(:) = -101d0
History_Panels6_other_ymax(:) = -101d0
History_Panels6_other_ymargin(:) = 0.1
History_Panels6_other_dymin(:) = -1

History_Panels6_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels6_use_decorator = .false.

File output

History_Panels6_file_flag = .false.
History_Panels6_file_dir = 'png'
History_Panels6_file_prefix = 'History_Panels6_'
History_Panels6_file_interval = 5
History_Panels6_file_width = -1
History_Panels6_file_aspect_ratio = -1

History_Panels7

History_Panels7_win_flag = .false.

History_Panels7_win_width = 6
History_Panels7_win_aspect_ratio = 0.75

History_Panels7_xleft = 0.15
History_Panels7_xright = 0.85
History_Panels7_ybot = 0.15
History_Panels7_ytop = 0.85
History_Panels7_txt_scale = 1.0
History_Panels7_title = 'History_Panels7'

History_Panels7_xaxis_name = 'model_number'
History_Panels7_xmin = -101d0
History_Panels7_xmax = -101d0
History_Panels7_max_width = 100
History_Panels7_dxmin = -1
History_Panels7_xaxis_reversed = .false.
History_Panels7_xaxis_log = .false.
History_Panels7_xmargin = 0.0
History_Panels7_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels7_same_yaxis_range(:) = .false.

History_Panels7_num_panels = 0

History_Panels7_yaxis_name(:) = ''
History_Panels7_yaxis_reversed(:) = .false.
History_Panels7_yaxis_log(:) = .false.
History_Panels7_ymin(:) = -101d0
History_Panels7_ymax(:) = -101d0
History_Panels7_ymargin(:) = 0.1
History_Panels7_dymin(:) = -1

History_Panels7_other_yaxis_name(:) = ''
History_Panels7_other_yaxis_reversed(:) = .false.
History_Panels7_other_yaxis_log(:) = .false.
History_Panels7_other_ymin(:) = -101d0
History_Panels7_other_ymax(:) = -101d0
History_Panels7_other_ymargin(:) = 0.1
History_Panels7_other_dymin(:) = -1

History_Panels7_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels7_use_decorator = .false.

File output

History_Panels7_file_flag = .false.
History_Panels7_file_dir = 'png'
History_Panels7_file_prefix = 'History_Panels7_'
History_Panels7_file_interval = 5
History_Panels7_file_width = -1
History_Panels7_file_aspect_ratio = -1

History_Panels8

History_Panels8_win_flag = .false.

History_Panels8_win_width = 6
History_Panels8_win_aspect_ratio = 0.75

History_Panels8_xleft = 0.15
History_Panels8_xright = 0.85
History_Panels8_ybot = 0.15
History_Panels8_ytop = 0.85
History_Panels8_txt_scale = 1.0
History_Panels8_title = 'History_Panels8'

History_Panels8_xaxis_name = 'model_number'
History_Panels8_xmin = -101d0
History_Panels8_xmax = -101d0
History_Panels8_max_width = 100
History_Panels8_dxmin = -1
History_Panels8_xaxis_reversed = .false.
History_Panels8_xaxis_log = .false.
History_Panels8_xmargin = 0.0
History_Panels8_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels8_same_yaxis_range(:) = .false.

History_Panels8_num_panels = 0

History_Panels8_yaxis_name(:) = ''
History_Panels8_yaxis_reversed(:) = .false.
History_Panels8_yaxis_log(:) = .false.
History_Panels8_ymin(:) = -101d0
History_Panels8_ymax(:) = -101d0
History_Panels8_ymargin(:) = 0.1
History_Panels8_dymin(:) = -1

History_Panels8_other_yaxis_name(:) = ''
History_Panels8_other_yaxis_reversed(:) = .false.
History_Panels8_other_yaxis_log(:) = .false.
History_Panels8_other_ymin(:) = -101d0
History_Panels8_other_ymax(:) = -101d0
History_Panels8_other_ymargin(:) = 0.1
History_Panels8_other_dymin(:) = -1

History_Panels8_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels8_use_decorator = .false.

File output

History_Panels8_file_flag = .false.
History_Panels8_file_dir = 'png'
History_Panels8_file_prefix = 'History_Panels8_'
History_Panels8_file_interval = 5
History_Panels8_file_width = -1
History_Panels8_file_aspect_ratio = -1

History_Panels9

History_Panels9_win_flag = .false.

History_Panels9_win_width = 6
History_Panels9_win_aspect_ratio = 0.75

History_Panels9_xleft = 0.15
History_Panels9_xright = 0.85
History_Panels9_ybot = 0.15
History_Panels9_ytop = 0.85
History_Panels9_txt_scale = 1.0
History_Panels9_title = 'History_Panels9'

History_Panels9_xaxis_name = 'model_number'
History_Panels9_xmin = -101d0
History_Panels9_xmax = -101d0
History_Panels9_max_width = 100
History_Panels9_dxmin = -1
History_Panels9_xaxis_reversed = .false.
History_Panels9_xaxis_log = .false.
History_Panels9_xmargin = 0.0
History_Panels9_automatic_star_age_units = .false. ! if xaxis_name = 'star_age'

History_Panels9_same_yaxis_range(:) = .false.

History_Panels9_num_panels = 0

History_Panels9_yaxis_name(1) = 'num_zones'
History_Panels9_yaxis_reversed(1) = .false.
History_Panels9_ymin(1) = -101d0
History_Panels9_ymax(1) = -101d0
History_Panels9_dymin(1) = -1

History_Panels9_yaxis_name(:) = ''
History_Panels9_yaxis_reversed(:) = .false.
History_Panels9_yaxis_log(:) = .false.
History_Panels9_ymin(:) = -101d0
History_Panels9_ymax(:) = -101d0
History_Panels9_ymargin(:) = 0.1
History_Panels9_dymin(:) = -1

History_Panels9_other_yaxis_name(:) = ''
History_Panels9_other_yaxis_reversed(:) = .false.
History_Panels9_other_yaxis_log(:) = .false.
History_Panels9_other_ymin(:) = -101d0
History_Panels9_other_ymax(:) = -101d0
History_Panels9_other_ymargin(:) = 0.1
History_Panels9_other_dymin(:) = -1

History_Panels9_points_name(:) = ''

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

History_Panels9_use_decorator = .false.

File output

History_Panels9_file_flag = .false.
History_Panels9_file_dir = 'png'
History_Panels9_file_prefix = 'History_Panels9_'
History_Panels9_file_interval = 5
History_Panels9_file_width = -1
History_Panels9_file_aspect_ratio = -1

History_Panel_points_error_bars

History_Panel_points_interval

History_Panel_points_marker

History_Panel_points_ci

History_Panel_points_lw

History_Panel_points_ch

History_Panel_points_error_bars = .true.
History_Panel_points_interval = 1
History_Panel_points_marker = 5
History_Panel_points_ci = 1
History_Panel_points_lw = 1
History_Panel_points_ch = 1.0

Color Magnitude Panels

Plots either color-color, color-magnitude, magnitude-color or magnitude-magnitude

Color_magnitude1

Color_magnitude1_win_flag = .false.

Color_magnitude1_win_width = 6
Color_magnitude1_win_aspect_ratio = 0.75

Color_magnitude1_xleft = 0.15
Color_magnitude1_xright = 0.85
Color_magnitude1_ybot = 0.15
Color_magnitude1_ytop = 0.85
Color_magnitude1_txt_scale = 1.0
Color_magnitude1_title = 'Color_magnitude1'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude1_xaxis1_name = ''
Color_magnitude1_xaxis2_name = ''
Color_magnitude1_xmin = -101d0
Color_magnitude1_xmax = -101d0
Color_magnitude1_max_width = 100
Color_magnitude1_dxmin = -1
Color_magnitude1_xaxis_reversed = .false.
Color_magnitude1_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude1_yaxis1_name(:) = ''
Color_magnitude1_yaxis2_name(:) = ''
Color_magnitude1_yaxis_reversed(:) = .false.
Color_magnitude1_yaxis_log(:) = .false.
Color_magnitude1_ymin(:) = -101d0
Color_magnitude1_ymax(:) = -101d0
Color_magnitude1_ymargin(:) = 0.1
Color_magnitude1_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude1_other_yaxis1_name(:) = ''
Color_magnitude1_other_yaxis2_name(:) = ''
Color_magnitude1_other_yaxis_reversed(:) = .false.
Color_magnitude1_other_yaxis_log(:) = .false.
Color_magnitude1_other_ymin(:) = -101d0
Color_magnitude1_other_ymax(:) = -101d0
Color_magnitude1_other_ymargin(:) = 0.1
Color_magnitude1_other_dymin(:) = -1

setup default

Color_magnitude1_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude1_xaxis1_name = ''
Color_magnitude1_xaxis2_name = ''
Color_magnitude1_xmin = -101d0
Color_magnitude1_xmax = -101d0
Color_magnitude1_max_width = 100
Color_magnitude1_dxmin = -1
Color_magnitude1_xaxis_reversed = .false.
Color_magnitude1_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude1_yaxis1_name(:) = ''
Color_magnitude1_yaxis2_name(:) = ''
Color_magnitude1_yaxis_reversed(:) = .false.
Color_magnitude1_yaxis_log(:) = .false.
Color_magnitude1_ymin(:) = -101d0
Color_magnitude1_ymax(:) = -101d0
Color_magnitude1_ymargin(:) = 0.1
Color_magnitude1_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude1_other_yaxis1_name(:) = ''
Color_magnitude1_other_yaxis2_name(:) = ''
Color_magnitude1_other_yaxis_reversed(:) = .false.
Color_magnitude1_other_yaxis_log(:) = .false.
Color_magnitude1_other_ymin(:) = -101d0
Color_magnitude1_other_ymax(:) = -101d0
Color_magnitude1_other_ymargin(:) = 0.1
Color_magnitude1_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude1_use_decorator = .false.

File output

Color_magnitude1_file_flag = .false.
Color_magnitude1_file_dir = 'png'
Color_magnitude1_file_prefix = 'Color_magnitude1_'
Color_magnitude1_file_interval = 5
Color_magnitude1_file_width = -1
Color_magnitude1_file_aspect_ratio = -1

Color_magnitude2

Color_magnitude2_win_flag = .false.

Color_magnitude2_win_width = 6
Color_magnitude2_win_aspect_ratio = 0.75

Color_magnitude2_xleft = 0.15
Color_magnitude2_xright = 0.85
Color_magnitude2_ybot = 0.15
Color_magnitude2_ytop = 0.85
Color_magnitude2_txt_scale = 1.0
Color_magnitude2_title = 'Color_magnitude2'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude2_xaxis1_name = ''
Color_magnitude2_xaxis2_name = ''
Color_magnitude2_xmin = -101d0
Color_magnitude2_xmax = -101d0
Color_magnitude2_max_width = 100
Color_magnitude2_dxmin = -1
Color_magnitude2_xaxis_reversed = .false.
Color_magnitude2_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude2_yaxis1_name(:) = ''
Color_magnitude2_yaxis2_name(:) = ''
Color_magnitude2_yaxis_reversed(:) = .false.
Color_magnitude2_yaxis_log(:) = .false.
Color_magnitude2_ymin(:) = -101d0
Color_magnitude2_ymax(:) = -101d0
Color_magnitude2_ymargin(:) = 0.1
Color_magnitude2_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude2_other_yaxis1_name(:) = ''
Color_magnitude2_other_yaxis2_name(:) = ''
Color_magnitude2_other_yaxis_reversed(:) = .false.
Color_magnitude2_other_yaxis_log(:) = .false.
Color_magnitude2_other_ymin(:) = -101d0
Color_magnitude2_other_ymax(:) = -101d0
Color_magnitude2_other_ymargin(:) = 0.1
Color_magnitude2_other_dymin(:) = -1

setup default

Color_magnitude2_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude2_xaxis1_name = ''
Color_magnitude2_xaxis2_name = ''
Color_magnitude2_xmin = -101d0
Color_magnitude2_xmax = -101d0
Color_magnitude2_max_width = 100
Color_magnitude2_dxmin = -1
Color_magnitude2_xaxis_reversed = .false.
Color_magnitude2_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude2_yaxis1_name(:) = ''
Color_magnitude2_yaxis2_name(:) = ''
Color_magnitude2_yaxis_reversed(:) = .false.
Color_magnitude2_yaxis_log(:) = .false.
Color_magnitude2_ymin(:) = -101d0
Color_magnitude2_ymax(:) = -101d0
Color_magnitude2_ymargin(:) = 0.1
Color_magnitude2_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude2_other_yaxis1_name(:) = ''
Color_magnitude2_other_yaxis2_name(:) = ''
Color_magnitude2_other_yaxis_reversed(:) = .false.
Color_magnitude2_other_yaxis_log(:) = .false.
Color_magnitude2_other_ymin(:) = -101d0
Color_magnitude2_other_ymax(:) = -101d0
Color_magnitude2_other_ymargin(:) = 0.1
Color_magnitude2_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude2_use_decorator = .false.

File output

Color_magnitude2_file_flag = .false.
Color_magnitude2_file_dir = 'png'
Color_magnitude2_file_prefix = 'Color_magnitude2_'
Color_magnitude2_file_interval = 5
Color_magnitude2_file_width = -1
Color_magnitude2_file_aspect_ratio = -1

Color_magnitude3

Color_magnitude3_win_flag = .false.

Color_magnitude3_win_width = 6
Color_magnitude3_win_aspect_ratio = 0.75

Color_magnitude3_xleft = 0.15
Color_magnitude3_xright = 0.85
Color_magnitude3_ybot = 0.15
Color_magnitude3_ytop = 0.85
Color_magnitude3_txt_scale = 1.0
Color_magnitude3_title = 'Color_magnitude3'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude3_xaxis1_name = ''
Color_magnitude3_xaxis2_name = ''
Color_magnitude3_xmin = -101d0
Color_magnitude3_xmax = -101d0
Color_magnitude3_max_width = 100
Color_magnitude3_dxmin = -1
Color_magnitude3_xaxis_reversed = .false.
Color_magnitude3_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude3_yaxis1_name(:) = ''
Color_magnitude3_yaxis2_name(:) = ''
Color_magnitude3_yaxis_reversed(:) = .false.
Color_magnitude3_yaxis_log(:) = .false.
Color_magnitude3_ymin(:) = -101d0
Color_magnitude3_ymax(:) = -101d0
Color_magnitude3_ymargin(:) = 0.1
Color_magnitude3_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude3_other_yaxis1_name(:) = ''
Color_magnitude3_other_yaxis2_name(:) = ''
Color_magnitude3_other_yaxis_reversed(:) = .false.
Color_magnitude3_other_yaxis_log(:) = .false.
Color_magnitude3_other_ymin(:) = -101d0
Color_magnitude3_other_ymax(:) = -101d0
Color_magnitude3_other_ymargin(:) = 0.1
Color_magnitude3_other_dymin(:) = -1

setup default

Color_magnitude3_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude3_xaxis1_name = ''
Color_magnitude3_xaxis2_name = ''
Color_magnitude3_xmin = -101d0
Color_magnitude3_xmax = -101d0
Color_magnitude3_max_width = 100
Color_magnitude3_dxmin = -1
Color_magnitude3_xaxis_reversed = .false.
Color_magnitude3_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude3_yaxis1_name(:) = ''
Color_magnitude3_yaxis2_name(:) = ''
Color_magnitude3_yaxis_reversed(:) = .false.
Color_magnitude3_yaxis_log(:) = .false.
Color_magnitude3_ymin(:) = -101d0
Color_magnitude3_ymax(:) = -101d0
Color_magnitude3_ymargin(:) = 0.1
Color_magnitude3_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude3_other_yaxis1_name(:) = ''
Color_magnitude3_other_yaxis2_name(:) = ''
Color_magnitude3_other_yaxis_reversed(:) = .false.
Color_magnitude3_other_yaxis_log(:) = .false.
Color_magnitude3_other_ymin(:) = -101d0
Color_magnitude3_other_ymax(:) = -101d0
Color_magnitude3_other_ymargin(:) = 0.1
Color_magnitude3_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude3_use_decorator = .false.

File output

Color_magnitude3_file_flag = .false.
Color_magnitude3_file_dir = 'png'
Color_magnitude3_file_prefix = 'Color_magnitude3_'
Color_magnitude3_file_interval = 5
Color_magnitude3_file_width = -1
Color_magnitude3_file_aspect_ratio = -1

Color_magnitude4

Color_magnitude4_win_flag = .false.

Color_magnitude4_win_width = 6
Color_magnitude4_win_aspect_ratio = 0.75

Color_magnitude4_xleft = 0.15
Color_magnitude4_xright = 0.85
Color_magnitude4_ybot = 0.15
Color_magnitude4_ytop = 0.85
Color_magnitude4_txt_scale = 1.0
Color_magnitude4_title = 'Color_magnitude4'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude4_xaxis1_name = ''
Color_magnitude4_xaxis2_name = ''
Color_magnitude4_xmin = -101d0
Color_magnitude4_xmax = -101d0
Color_magnitude4_max_width = 100
Color_magnitude4_dxmin = -1
Color_magnitude4_xaxis_reversed = .false.
Color_magnitude4_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude4_yaxis1_name(:) = ''
Color_magnitude4_yaxis2_name(:) = ''
Color_magnitude4_yaxis_reversed(:) = .false.
Color_magnitude4_yaxis_log(:) = .false.
Color_magnitude4_ymin(:) = -101d0
Color_magnitude4_ymax(:) = -101d0
Color_magnitude4_ymargin(:) = 0.1
Color_magnitude4_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude4_other_yaxis1_name(:) = ''
Color_magnitude4_other_yaxis2_name(:) = ''
Color_magnitude4_other_yaxis_reversed(:) = .false.
Color_magnitude4_other_yaxis_log(:) = .false.
Color_magnitude4_other_ymin(:) = -101d0
Color_magnitude4_other_ymax(:) = -101d0
Color_magnitude4_other_ymargin(:) = 0.1
Color_magnitude4_other_dymin(:) = -1

setup default

Color_magnitude4_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude4_xaxis1_name = ''
Color_magnitude4_xaxis2_name = ''
Color_magnitude4_xmin = -101d0
Color_magnitude4_xmax = -101d0
Color_magnitude4_max_width = 100
Color_magnitude4_dxmin = -1
Color_magnitude4_xaxis_reversed = .false.
Color_magnitude4_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude4_yaxis1_name(:) = ''
Color_magnitude4_yaxis2_name(:) = ''
Color_magnitude4_yaxis_reversed(:) = .false.
Color_magnitude4_yaxis_log(:) = .false.
Color_magnitude4_ymin(:) = -101d0
Color_magnitude4_ymax(:) = -101d0
Color_magnitude4_ymargin(:) = 0.1
Color_magnitude4_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude4_other_yaxis1_name(:) = ''
Color_magnitude4_other_yaxis2_name(:) = ''
Color_magnitude4_other_yaxis_reversed(:) = .false.
Color_magnitude4_other_yaxis_log(:) = .false.
Color_magnitude4_other_ymin(:) = -101d0
Color_magnitude4_other_ymax(:) = -101d0
Color_magnitude4_other_ymargin(:) = 0.1
Color_magnitude4_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude4_use_decorator = .false.

File output

Color_magnitude4_file_flag = .false.
Color_magnitude4_file_dir = 'png'
Color_magnitude4_file_prefix = 'Color_magnitude4_'
Color_magnitude4_file_interval = 5
Color_magnitude4_file_width = -1
Color_magnitude4_file_aspect_ratio = -1

Color_magnitude5

Color_magnitude5_win_flag = .false.

Color_magnitude5_win_width = 6
Color_magnitude5_win_aspect_ratio = 0.75

Color_magnitude5_xleft = 0.15
Color_magnitude5_xright = 0.85
Color_magnitude5_ybot = 0.15
Color_magnitude5_ytop = 0.85
Color_magnitude5_txt_scale = 1.0
Color_magnitude5_title = 'Color_magnitude5'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude5_xaxis1_name = ''
Color_magnitude5_xaxis2_name = ''
Color_magnitude5_xmin = -101d0
Color_magnitude5_xmax = -101d0
Color_magnitude5_max_width = 100
Color_magnitude5_dxmin = -1
Color_magnitude5_xaxis_reversed = .false.
Color_magnitude5_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude5_yaxis1_name(:) = ''
Color_magnitude5_yaxis2_name(:) = ''
Color_magnitude5_yaxis_reversed(:) = .false.
Color_magnitude5_yaxis_log(:) = .false.
Color_magnitude5_ymin(:) = -101d0
Color_magnitude5_ymax(:) = -101d0
Color_magnitude5_ymargin(:) = 0.1
Color_magnitude5_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude5_other_yaxis1_name(:) = ''
Color_magnitude5_other_yaxis2_name(:) = ''
Color_magnitude5_other_yaxis_reversed(:) = .false.
Color_magnitude5_other_yaxis_log(:) = .false.
Color_magnitude5_other_ymin(:) = -101d0
Color_magnitude5_other_ymax(:) = -101d0
Color_magnitude5_other_ymargin(:) = 0.1
Color_magnitude5_other_dymin(:) = -1

setup default

Color_magnitude5_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude5_xaxis1_name = ''
Color_magnitude5_xaxis2_name = ''
Color_magnitude5_xmin = -101d0
Color_magnitude5_xmax = -101d0
Color_magnitude5_max_width = 100
Color_magnitude5_dxmin = -1
Color_magnitude5_xaxis_reversed = .false.
Color_magnitude5_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude5_yaxis1_name(:) = ''
Color_magnitude5_yaxis2_name(:) = ''
Color_magnitude5_yaxis_reversed(:) = .false.
Color_magnitude5_yaxis_log(:) = .false.
Color_magnitude5_ymin(:) = -101d0
Color_magnitude5_ymax(:) = -101d0
Color_magnitude5_ymargin(:) = 0.1
Color_magnitude5_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude5_other_yaxis1_name(:) = ''
Color_magnitude5_other_yaxis2_name(:) = ''
Color_magnitude5_other_yaxis_reversed(:) = .false.
Color_magnitude5_other_yaxis_log(:) = .false.
Color_magnitude5_other_ymin(:) = -101d0
Color_magnitude5_other_ymax(:) = -101d0
Color_magnitude5_other_ymargin(:) = 0.1
Color_magnitude5_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude5_use_decorator = .false.

File output

Color_magnitude5_file_flag = .false.
Color_magnitude5_file_dir = 'png'
Color_magnitude5_file_prefix = 'Color_magnitude5_'
Color_magnitude5_file_interval = 5
Color_magnitude5_file_width = -1
Color_magnitude5_file_aspect_ratio = -1

Color_magnitude6

Color_magnitude6_win_flag = .false.

Color_magnitude6_win_width = 6
Color_magnitude6_win_aspect_ratio = 0.75

Color_magnitude6_xleft = 0.15
Color_magnitude6_xright = 0.85
Color_magnitude6_ybot = 0.15
Color_magnitude6_ytop = 0.85
Color_magnitude6_txt_scale = 1.0
Color_magnitude6_title = 'Color_magnitude6'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude6_xaxis1_name = ''
Color_magnitude6_xaxis2_name = ''
Color_magnitude6_xmin = -101d0
Color_magnitude6_xmax = -101d0
Color_magnitude6_max_width = 100
Color_magnitude6_dxmin = -1
Color_magnitude6_xaxis_reversed = .false.
Color_magnitude6_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude6_yaxis1_name(:) = ''
Color_magnitude6_yaxis2_name(:) = ''
Color_magnitude6_yaxis_reversed(:) = .false.
Color_magnitude6_yaxis_log(:) = .false.
Color_magnitude6_ymin(:) = -101d0
Color_magnitude6_ymax(:) = -101d0
Color_magnitude6_ymargin(:) = 0.1
Color_magnitude6_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude6_other_yaxis1_name(:) = ''
Color_magnitude6_other_yaxis2_name(:) = ''
Color_magnitude6_other_yaxis_reversed(:) = .false.
Color_magnitude6_other_yaxis_log(:) = .false.
Color_magnitude6_other_ymin(:) = -101d0
Color_magnitude6_other_ymax(:) = -101d0
Color_magnitude6_other_ymargin(:) = 0.1
Color_magnitude6_other_dymin(:) = -1

setup default

Color_magnitude6_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude6_xaxis1_name = ''
Color_magnitude6_xaxis2_name = ''
Color_magnitude6_xmin = -101d0
Color_magnitude6_xmax = -101d0
Color_magnitude6_max_width = 100
Color_magnitude6_dxmin = -1
Color_magnitude6_xaxis_reversed = .false.
Color_magnitude6_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude6_yaxis1_name(:) = ''
Color_magnitude6_yaxis2_name(:) = ''
Color_magnitude6_yaxis_reversed(:) = .false.
Color_magnitude6_yaxis_log(:) = .false.
Color_magnitude6_ymin(:) = -101d0
Color_magnitude6_ymax(:) = -101d0
Color_magnitude6_ymargin(:) = 0.1
Color_magnitude6_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude6_other_yaxis1_name(:) = ''
Color_magnitude6_other_yaxis2_name(:) = ''
Color_magnitude6_other_yaxis_reversed(:) = .false.
Color_magnitude6_other_yaxis_log(:) = .false.
Color_magnitude6_other_ymin(:) = -101d0
Color_magnitude6_other_ymax(:) = -101d0
Color_magnitude6_other_ymargin(:) = 0.1
Color_magnitude6_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude6_use_decorator = .false.

File output

Color_magnitude6_file_flag = .false.
Color_magnitude6_file_dir = 'png'
Color_magnitude6_file_prefix = 'Color_magnitude6_'
Color_magnitude6_file_interval = 5
Color_magnitude6_file_width = -1
Color_magnitude6_file_aspect_ratio = -1

Color_magnitude7

Color_magnitude7_win_flag = .false.

Color_magnitude7_win_width = 6
Color_magnitude7_win_aspect_ratio = 0.75

Color_magnitude7_xleft = 0.15
Color_magnitude7_xright = 0.85
Color_magnitude7_ybot = 0.15
Color_magnitude7_ytop = 0.85
Color_magnitude7_txt_scale = 1.0
Color_magnitude7_title = 'Color_magnitude7'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude7_xaxis1_name = ''
Color_magnitude7_xaxis2_name = ''
Color_magnitude7_xmin = -101d0
Color_magnitude7_xmax = -101d0
Color_magnitude7_max_width = 100
Color_magnitude7_dxmin = -1
Color_magnitude7_xaxis_reversed = .false.
Color_magnitude7_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude7_yaxis1_name(:) = ''
Color_magnitude7_yaxis2_name(:) = ''
Color_magnitude7_yaxis_reversed(:) = .false.
Color_magnitude7_yaxis_log(:) = .false.
Color_magnitude7_ymin(:) = -101d0
Color_magnitude7_ymax(:) = -101d0
Color_magnitude7_ymargin(:) = 0.1
Color_magnitude7_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude7_other_yaxis1_name(:) = ''
Color_magnitude7_other_yaxis2_name(:) = ''
Color_magnitude7_other_yaxis_reversed(:) = .false.
Color_magnitude7_other_yaxis_log(:) = .false.
Color_magnitude7_other_ymin(:) = -101d0
Color_magnitude7_other_ymax(:) = -101d0
Color_magnitude7_other_ymargin(:) = 0.1
Color_magnitude7_other_dymin(:) = -1

setup default

Color_magnitude7_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude7_xaxis1_name = ''
Color_magnitude7_xaxis2_name = ''
Color_magnitude7_xmin = -101d0
Color_magnitude7_xmax = -101d0
Color_magnitude7_max_width = 100
Color_magnitude7_dxmin = -1
Color_magnitude7_xaxis_reversed = .false.
Color_magnitude7_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude7_yaxis1_name(:) = ''
Color_magnitude7_yaxis2_name(:) = ''
Color_magnitude7_yaxis_reversed(:) = .false.
Color_magnitude7_yaxis_log(:) = .false.
Color_magnitude7_ymin(:) = -101d0
Color_magnitude7_ymax(:) = -101d0
Color_magnitude7_ymargin(:) = 0.1
Color_magnitude7_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude7_other_yaxis1_name(:) = ''
Color_magnitude7_other_yaxis2_name(:) = ''
Color_magnitude7_other_yaxis_reversed(:) = .false.
Color_magnitude7_other_yaxis_log(:) = .false.
Color_magnitude7_other_ymin(:) = -101d0
Color_magnitude7_other_ymax(:) = -101d0
Color_magnitude7_other_ymargin(:) = 0.1
Color_magnitude7_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude7_use_decorator = .false.

File output

Color_magnitude7_file_flag = .false.
Color_magnitude7_file_dir = 'png'
Color_magnitude7_file_prefix = 'Color_magnitude7_'
Color_magnitude7_file_interval = 5
Color_magnitude7_file_width = -1
Color_magnitude7_file_aspect_ratio = -1

Color_magnitude8

Color_magnitude8_win_flag = .false.

Color_magnitude8_win_width = 6
Color_magnitude8_win_aspect_ratio = 0.75

Color_magnitude8_xleft = 0.15
Color_magnitude8_xright = 0.85
Color_magnitude8_ybot = 0.15
Color_magnitude8_ytop = 0.85
Color_magnitude8_txt_scale = 1.0
Color_magnitude8_title = 'Color_magnitude8'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude8_xaxis1_name = ''
Color_magnitude8_xaxis2_name = ''
Color_magnitude8_xmin = -101d0
Color_magnitude8_xmax = -101d0
Color_magnitude8_max_width = 100
Color_magnitude8_dxmin = -1
Color_magnitude8_xaxis_reversed = .false.
Color_magnitude8_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude8_yaxis1_name(:) = ''
Color_magnitude8_yaxis2_name(:) = ''
Color_magnitude8_yaxis_reversed(:) = .false.
Color_magnitude8_yaxis_log(:) = .false.
Color_magnitude8_ymin(:) = -101d0
Color_magnitude8_ymax(:) = -101d0
Color_magnitude8_ymargin(:) = 0.1
Color_magnitude8_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude8_other_yaxis1_name(:) = ''
Color_magnitude8_other_yaxis2_name(:) = ''
Color_magnitude8_other_yaxis_reversed(:) = .false.
Color_magnitude8_other_yaxis_log(:) = .false.
Color_magnitude8_other_ymin(:) = -101d0
Color_magnitude8_other_ymax(:) = -101d0
Color_magnitude8_other_ymargin(:) = 0.1
Color_magnitude8_other_dymin(:) = -1

setup default

Color_magnitude8_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude8_xaxis1_name = ''
Color_magnitude8_xaxis2_name = ''
Color_magnitude8_xmin = -101d0
Color_magnitude8_xmax = -101d0
Color_magnitude8_max_width = 100
Color_magnitude8_dxmin = -1
Color_magnitude8_xaxis_reversed = .false.
Color_magnitude8_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude8_yaxis1_name(:) = ''
Color_magnitude8_yaxis2_name(:) = ''
Color_magnitude8_yaxis_reversed(:) = .false.
Color_magnitude8_yaxis_log(:) = .false.
Color_magnitude8_ymin(:) = -101d0
Color_magnitude8_ymax(:) = -101d0
Color_magnitude8_ymargin(:) = 0.1
Color_magnitude8_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude8_other_yaxis1_name(:) = ''
Color_magnitude8_other_yaxis2_name(:) = ''
Color_magnitude8_other_yaxis_reversed(:) = .false.
Color_magnitude8_other_yaxis_log(:) = .false.
Color_magnitude8_other_ymin(:) = -101d0
Color_magnitude8_other_ymax(:) = -101d0
Color_magnitude8_other_ymargin(:) = 0.1
Color_magnitude8_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude8_use_decorator = .false.

File output

Color_magnitude8_file_flag = .false.
Color_magnitude8_file_dir = 'png'
Color_magnitude8_file_prefix = 'Color_magnitude8_'
Color_magnitude8_file_interval = 5
Color_magnitude8_file_width = -1
Color_magnitude8_file_aspect_ratio = -1

Color_magnitude9

Color_magnitude9_win_flag = .false.

Color_magnitude9_win_width = 6
Color_magnitude9_win_aspect_ratio = 0.75

Color_magnitude9_xleft = 0.15
Color_magnitude9_xright = 0.85
Color_magnitude9_ybot = 0.15
Color_magnitude9_ytop = 0.85
Color_magnitude9_txt_scale = 1.0
Color_magnitude9_title = 'Color_magnitude9'

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude9_xaxis1_name = ''
Color_magnitude9_xaxis2_name = ''
Color_magnitude9_xmin = -101d0
Color_magnitude9_xmax = -101d0
Color_magnitude9_max_width = 100
Color_magnitude9_dxmin = -1
Color_magnitude9_xaxis_reversed = .false.
Color_magnitude9_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude9_yaxis1_name(:) = ''
Color_magnitude9_yaxis2_name(:) = ''
Color_magnitude9_yaxis_reversed(:) = .false.
Color_magnitude9_yaxis_log(:) = .false.
Color_magnitude9_ymin(:) = -101d0
Color_magnitude9_ymax(:) = -101d0
Color_magnitude9_ymargin(:) = 0.1
Color_magnitude9_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude9_other_yaxis1_name(:) = ''
Color_magnitude9_other_yaxis2_name(:) = ''
Color_magnitude9_other_yaxis_reversed(:) = .false.
Color_magnitude9_other_yaxis_log(:) = .false.
Color_magnitude9_other_ymin(:) = -101d0
Color_magnitude9_other_ymax(:) = -101d0
Color_magnitude9_other_ymargin(:) = 0.1
Color_magnitude9_other_dymin(:) = -1

setup default

Color_magnitude9_num_panels = 0

Plots xaxis1-xaxis2 leave xaxis2 blank if you only want to plot xaxis1.

Color_magnitude9_xaxis1_name = ''
Color_magnitude9_xaxis2_name = ''
Color_magnitude9_xmin = -101d0
Color_magnitude9_xmax = -101d0
Color_magnitude9_max_width = 100
Color_magnitude9_dxmin = -1
Color_magnitude9_xaxis_reversed = .false.
Color_magnitude9_xaxis_log = .false.

Plots yaxis1-yaxis2 leave yaxis2 blank if you only want to plot yaxis1.

Color_magnitude9_yaxis1_name(:) = ''
Color_magnitude9_yaxis2_name(:) = ''
Color_magnitude9_yaxis_reversed(:) = .false.
Color_magnitude9_yaxis_log(:) = .false.
Color_magnitude9_ymin(:) = -101d0
Color_magnitude9_ymax(:) = -101d0
Color_magnitude9_ymargin(:) = 0.1
Color_magnitude9_dymin(:) = -1

Plots other_yaxis1-other_yaxis2 leave other_yaxis2 blank if you only want to plot other_yaxis1.

Color_magnitude9_other_yaxis1_name(:) = ''
Color_magnitude9_other_yaxis2_name(:) = ''
Color_magnitude9_other_yaxis_reversed(:) = .false.
Color_magnitude9_other_yaxis_log(:) = .false.
Color_magnitude9_other_ymin(:) = -101d0
Color_magnitude9_other_ymax(:) = -101d0
Color_magnitude9_other_ymargin(:) = 0.1
Color_magnitude9_other_dymin(:) = -1

Enables calling a subroutine to add extra information to a plot see $MESA_DIR/star/other/pgstar_decorator.f90

Color_magnitude9_use_decorator = .false.

File output

Color_magnitude9_file_flag = .false.
Color_magnitude9_file_dir = 'png'
Color_magnitude9_file_prefix = 'Color_magnitude9_'
Color_magnitude9_file_interval = 5
Color_magnitude9_file_width = -1
Color_magnitude9_file_aspect_ratio = -1

Text Summary

Text_Summary1

Text_Summary1_win_flag = .false.
Text_Summary1_win_width = 10
Text_Summary1_win_aspect_ratio = 0.15

Text_Summary1_xleft = 0.02
Text_Summary1_xright = 0.98
Text_Summary1_ybot = 0.08
Text_Summary1_ytop = 0.98
Text_Summary1_txt_scale = 4.5
Text_Summary1_dxval = 0.02
Text_Summary1_title = ''

setup default

Text_Summary1_num_rows = 8
Text_Summary1_num_cols = 4
Text_Summary1_name(:,:) = ''

Text_Summary1_name(1,1) = 'model_number'
Text_Summary1_name(2,1) = 'log_star_age'
Text_Summary1_name(3,1) = 'log_dt'
Text_Summary1_name(4,1) = 'log_L'
Text_Summary1_name(5,1) = 'log_Teff'
Text_Summary1_name(6,1) = 'log_R'
Text_Summary1_name(7,1) = 'log_g'
Text_Summary1_name(8,1) = 'log_surf_cell_P'

Text_Summary1_name(1,2) = 'star_mass'
Text_Summary1_name(2,2) = 'log_abs_mdot'
Text_Summary1_name(3,2) = 'he_core_mass'
Text_Summary1_name(4,2) = 'co_core_mass'
Text_Summary1_name(5,2) = 'cz_bot_mass'
Text_Summary1_name(6,2) = 'cz_top_mass'
Text_Summary1_name(7,2) = 'cz_bot_radius'
Text_Summary1_name(8,2) = 'cz_top_radius'

Text_Summary1_name(1,3) = 'log_cntr_T'
Text_Summary1_name(2,3) = 'log_cntr_Rho'
Text_Summary1_name(3,3) = 'log_center_P'
Text_Summary1_name(4,3) = 'center h1'
Text_Summary1_name(5,3) = 'center he4'
Text_Summary1_name(6,3) = 'center c12'
Text_Summary1_name(7,3) = 'center n14'
Text_Summary1_name(8,3) = 'center o16'

Text_Summary1_name(1,4) = 'log_Lnuc'
Text_Summary1_name(2,4) = 'log_Lneu'
Text_Summary1_name(3,4) = 'log_LH'
Text_Summary1_name(4,4) = 'log_LHe'
Text_Summary1_name(5,4) = 'log_LZ'
Text_Summary1_name(6,4) = 'num_zones'
Text_Summary1_name(7,4) = 'num_retries'
Text_Summary1_name(8,4) = ''

File output

Text_Summary1_file_flag = .false.
Text_Summary1_file_dir = 'png'
Text_Summary1_file_prefix = 'Text_Summary1_'
Text_Summary1_file_interval = 5
Text_Summary1_file_width = -1
Text_Summary1_file_aspect_ratio = -1

Text_Summary2

Text_Summary2_win_flag = .false.
Text_Summary2_win_width = 6
Text_Summary2_win_aspect_ratio = 1.5

Text_Summary2_xleft = 0.02
Text_Summary2_xright = 0.98
Text_Summary2_ybot = 0.08
Text_Summary2_ytop = 0.98
Text_Summary2_txt_scale = 4.5
Text_Summary2_dxval = 0.02
Text_Summary2_title = ''

Text_Summary2_num_rows = 0
Text_Summary2_num_cols = 0
Text_Summary2_name(:,:) = ''

File output

Text_Summary2_file_flag = .false.
Text_Summary2_file_dir = 'png'
Text_Summary2_file_prefix = 'Text_Summary2_'
Text_Summary2_file_interval = 5
Text_Summary2_file_width = -1
Text_Summary2_file_aspect_ratio = -1

Text_Summary3

Text_Summary3_win_flag = .false.
Text_Summary3_win_width = 6
Text_Summary3_win_aspect_ratio = 1.5

Text_Summary3_xleft = 0.02
Text_Summary3_xright = 0.98
Text_Summary3_ybot = 0.08
Text_Summary3_ytop = 0.98
Text_Summary3_txt_scale = 4.5
Text_Summary3_dxval = 0.02
Text_Summary3_title = ''

Text_Summary3_num_rows = 0
Text_Summary3_num_cols = 0
Text_Summary3_name(:,:) = ''

File output

Text_Summary3_file_flag = .false.
Text_Summary3_file_dir = 'png'
Text_Summary3_file_prefix = 'Text_Summary3_'
Text_Summary3_file_interval = 5
Text_Summary3_file_width = -1
Text_Summary3_file_aspect_ratio = -1

Text_Summary4

Text_Summary4_win_flag = .false.
Text_Summary4_win_width = 6
Text_Summary4_win_aspect_ratio = 1.5

Text_Summary4_xleft = 0.02
Text_Summary4_xright = 0.98
Text_Summary4_ybot = 0.08
Text_Summary4_ytop = 0.98
Text_Summary4_txt_scale = 4.5
Text_Summary4_dxval = 0.02
Text_Summary4_title = ''

Text_Summary4_num_rows = 0
Text_Summary4_num_cols = 0
Text_Summary4_name(:,:) = ''

File output

Text_Summary4_file_flag = .false.
Text_Summary4_file_dir = 'png'
Text_Summary4_file_prefix = 'Text_Summary4_'
Text_Summary4_file_interval = 5
Text_Summary4_file_width = -1
Text_Summary4_file_aspect_ratio = -1

Text_Summary5

Text_Summary5_win_flag = .false.
Text_Summary5_win_width = 6
Text_Summary5_win_aspect_ratio = 1.5

Text_Summary5_xleft = 0.02
Text_Summary5_xright = 0.98
Text_Summary5_ybot = 0.08
Text_Summary5_ytop = 0.98
Text_Summary5_txt_scale = 4.5
Text_Summary5_dxval = 0.02
Text_Summary5_title = ''

Text_Summary5_num_rows = 0
Text_Summary5_num_cols = 0
Text_Summary5_name(:,:) = ''

File output

Text_Summary5_file_flag = .false.
Text_Summary5_file_dir = 'png'
Text_Summary5_file_prefix = 'Text_Summary5_'
Text_Summary5_file_interval = 5
Text_Summary5_file_width = -1
Text_Summary5_file_aspect_ratio = -1

Text_Summary6

Text_Summary6_win_flag = .false.
Text_Summary6_win_width = 6
Text_Summary6_win_aspect_ratio = 1.5

Text_Summary6_xleft = 0.02
Text_Summary6_xright = 0.98
Text_Summary6_ybot = 0.08
Text_Summary6_ytop = 0.98
Text_Summary6_txt_scale = 4.5
Text_Summary6_dxval = 0.02
Text_Summary6_title = ''

Text_Summary6_num_rows = 0
Text_Summary6_num_cols = 0
Text_Summary6_name(:,:) = ''

File output

Text_Summary6_file_flag = .false.
Text_Summary6_file_dir = 'png'
Text_Summary6_file_prefix = 'Text_Summary6_'
Text_Summary6_file_interval = 5
Text_Summary6_file_width = -1
Text_Summary6_file_aspect_ratio = -1

Text_Summary7

Text_Summary7_win_flag = .false.
Text_Summary7_win_width = 6
Text_Summary7_win_aspect_ratio = 1.5

Text_Summary7_xleft = 0.02
Text_Summary7_xright = 0.98
Text_Summary7_ybot = 0.08
Text_Summary7_ytop = 0.98
Text_Summary7_txt_scale = 4.5
Text_Summary7_dxval = 0.02
Text_Summary7_title = ''

Text_Summary7_num_rows = 0
Text_Summary7_num_cols = 0
Text_Summary7_name(:,:) = ''

File output

Text_Summary7_file_flag = .false.
Text_Summary7_file_dir = 'png'
Text_Summary7_file_prefix = 'Text_Summary7_'
Text_Summary7_file_interval = 5
Text_Summary7_file_width = -1
Text_Summary7_file_aspect_ratio = -1

Text_Summary8

Text_Summary8_win_flag = .false.
Text_Summary8_win_width = 6
Text_Summary8_win_aspect_ratio = 1.5

Text_Summary8_xleft = 0.02
Text_Summary8_xright = 0.98
Text_Summary8_ybot = 0.08
Text_Summary8_ytop = 0.98
Text_Summary8_txt_scale = 4.5
Text_Summary8_dxval = 0.02
Text_Summary8_title = ''

Text_Summary8_num_rows = 0
Text_Summary8_num_cols = 0
Text_Summary8_name(:,:) = ''

File output

Text_Summary8_file_flag = .false.
Text_Summary8_file_dir = 'png'
Text_Summary8_file_prefix = 'Text_Summary8_'
Text_Summary8_file_interval = 5
Text_Summary8_file_width = -1
Text_Summary8_file_aspect_ratio = -1

Text_Summary9

Text_Summary9_win_flag = .false.
Text_Summary9_win_width = 6
Text_Summary9_win_aspect_ratio = 1.5

Text_Summary9_xleft = 0.02
Text_Summary9_xright = 0.98
Text_Summary9_ybot = 0.08
Text_Summary9_ytop = 0.98
Text_Summary9_txt_scale = 4.5
Text_Summary9_dxval = 0.02
Text_Summary9_title = ''

Text_Summary9_num_rows = 0
Text_Summary9_num_cols = 0
Text_Summary9_name(:,:) = ''

File output

Text_Summary9_file_flag = .false.
Text_Summary9_file_dir = 'png'
Text_Summary9_file_prefix = 'Text_Summary9_'
Text_Summary9_file_interval = 5
Text_Summary9_file_width = -1
Text_Summary9_file_aspect_ratio = -1

Grid

Grid1

Grid1_win_flag = .false.

Grid1_win_width = 6
Grid1_win_aspect_ratio = 1

Grid1_xleft = 0.12
Grid1_xright = 0.95
Grid1_ybot = 0.08
Grid1_ytop = 0.92
Grid1_title = ''

Grid1_plot_name(:) = ''
Grid1_plot_row(:) = 1
Grid1_plot_rowspan(:) = 1
Grid1_plot_col(:) = 1
Grid1_plot_colspan(:) = 1
Grid1_plot_pad_left(:) = 0.0
Grid1_plot_pad_right(:) = 0.0
Grid1_plot_pad_top(:) = 0.0
Grid1_plot_pad_bot(:) = 0.0
Grid1_txt_scale_factor(:) = 0.7

set default

Grid1_num_cols = 2
Grid1_num_rows = 8
Grid1_num_plots = 4

Grid1_plot_name(1) = 'TRho_Profile'
Grid1_plot_row(1) = 1
Grid1_plot_rowspan(1) = 4
Grid1_plot_col(1) = 1
Grid1_plot_colspan(1) = 2
Grid1_plot_pad_left(1) = 0.0
Grid1_plot_pad_right(1) = 0.0
Grid1_plot_pad_top(1) = 0.0
Grid1_plot_pad_bot(1) = 0.1
Grid1_txt_scale_factor(1) = 0.7

Grid1_plot_name(2) = 'HR'
Grid1_plot_row(2) = 5
Grid1_plot_rowspan(2) = 2
Grid1_plot_col(2) = 1
Grid1_plot_colspan(2) = 1
Grid1_plot_pad_left(2) = 0.03
Grid1_plot_pad_right(2) = 0.07
Grid1_plot_pad_top(2) = 0.03
Grid1_plot_pad_bot(2) = 0.0
Grid1_txt_scale_factor(2) = 0.65

Grid1_plot_name(3) = 'TRho'
Grid1_plot_row(3) = 5
Grid1_plot_rowspan(3) = 2
Grid1_plot_col(3) = 2
Grid1_plot_colspan(3) = 1
Grid1_plot_pad_left(3) = 0.07
Grid1_plot_pad_right(3) = 0.03
Grid1_plot_pad_top(3) = 0.03
Grid1_plot_pad_bot(3) = 0.0
Grid1_txt_scale_factor(3) = 0.65

Grid1_plot_name(4) = 'Text_Summary1'
Grid1_plot_row(4) = 7
Grid1_plot_rowspan(4) = 2
Grid1_plot_col(4) = 1
Grid1_plot_colspan(4) = 2
Grid1_plot_pad_left(4) = -0.08
Grid1_plot_pad_right(4) = 0.0
Grid1_plot_pad_top(4) = 0.08
Grid1_plot_pad_bot(4) = -0.05
Grid1_txt_scale_factor(4) = 0.2

File output

Grid1_file_flag = .false.
Grid1_file_dir = 'png'
Grid1_file_prefix = 'grid1'
Grid1_file_interval = 5
Grid1_file_width = 9
Grid1_file_aspect_ratio = -1

Grid2

Grid2_win_flag = .false.

Grid2_win_width = 6
Grid2_win_aspect_ratio = 1

Grid2_xleft = 0.12
Grid2_xright = 0.95
Grid2_ybot = 0.08
Grid2_ytop = 0.92
Grid2_title = ''

Grid2_plot_name(:) = ''
Grid2_plot_row(:) = 1
Grid2_plot_rowspan(:) = 1
Grid2_plot_col(:) = 1
Grid2_plot_colspan(:) = 1
Grid2_plot_pad_left(:) = 0.0
Grid2_plot_pad_right(:) = 0.0
Grid2_plot_pad_top(:) = 0.0
Grid2_plot_pad_bot(:) = 0.0
Grid2_txt_scale_factor(:) = 0.7

set default

Grid2_win_width = 9
Grid2_win_aspect_ratio = 0.6

Grid2_num_cols = 4
Grid2_num_rows = 8
Grid2_num_plots = 5

Grid2_plot_name(1) = 'TRho_Profile'
Grid2_plot_row(1) = 1
Grid2_plot_rowspan(1) = 4
Grid2_plot_col(1) = 1
Grid2_plot_colspan(1) = 2
Grid2_plot_pad_left(1) = 0.0
Grid2_plot_pad_right(1) = 0.0
Grid2_plot_pad_top(1) = 0.0
Grid2_plot_pad_bot(1) = 0.1
Grid2_txt_scale_factor(1) = 0.7

Grid2_plot_name(2) = 'HR'
Grid2_plot_row(2) = 5
Grid2_plot_rowspan(2) = 2
Grid2_plot_col(2) = 1
Grid2_plot_colspan(2) = 1
Grid2_plot_pad_left(2) = 0.00
Grid2_plot_pad_right(2) = 0.04
Grid2_plot_pad_top(2) = 0.03
Grid2_plot_pad_bot(2) = 0.0
Grid2_txt_scale_factor(2) = 0.65

Grid2_plot_name(3) = 'TRho'
Grid2_plot_row(3) = 5
Grid2_plot_rowspan(3) = 2
Grid2_plot_col(3) = 2
Grid2_plot_colspan(3) = 1
Grid2_plot_pad_left(3) = 0.04
Grid2_plot_pad_right(3) = 0.00
Grid2_plot_pad_top(3) = 0.03
Grid2_plot_pad_bot(3) = 0.0
Grid2_txt_scale_factor(3) = 0.65

Grid2_plot_name(4) = 'Text_Summary1'
Grid2_plot_row(4) = 7
Grid2_plot_rowspan(4) = 2
Grid2_plot_col(4) = 1
Grid2_plot_colspan(4) = 4
Grid2_plot_pad_left(4) = -0.08
Grid2_plot_pad_right(4) = 0.0
Grid2_plot_pad_top(4) = 0.08
Grid2_plot_pad_bot(4) = -0.04
Grid2_txt_scale_factor(4) = 0.19

Grid2_plot_name(5) = 'Abundance'
Grid2_plot_row(5) = 1
Grid2_plot_rowspan(5) = 6
Grid2_plot_col(5) = 3
Grid2_plot_colspan(5) = 2
Grid2_plot_pad_left(5) = 0.07
Grid2_plot_pad_right(5) = 0.03
Grid2_plot_pad_top(5) = 0.0
Grid2_plot_pad_bot(5) = 0.0
Grid2_txt_scale_factor(5) = 0.65

File output

Grid2_file_flag = .false.
Grid2_file_dir = 'png'
Grid2_file_prefix = 'Grid2'
Grid2_file_interval = 5
Grid2_file_width = 9
Grid2_file_aspect_ratio = -1

Grid3

Grid3_win_flag = .false.

Grid3_win_width = 6
Grid3_win_aspect_ratio = 1.2

Grid3_xleft = 0.10
Grid3_xright = 0.89
Grid3_ybot = 0.08
Grid3_ytop = 0.92
Grid3_title = ''

Grid3_num_cols = 1
Grid3_num_rows = 1
Grid3_num_plots = 1

Grid3_plot_name(:) = ''
Grid3_plot_row(:) = 1
Grid3_plot_rowspan(:) = 1
Grid3_plot_col(:) = 1
Grid3_plot_colspan(:) = 1
Grid3_plot_pad_left(:) = 0.0
Grid3_plot_pad_right(:) = 0.0
Grid3_plot_pad_top(:) = 0.0
Grid3_plot_pad_bot(:) = 0.0
Grid3_txt_scale_factor(:) = 0.7

set default

Grid3_num_cols = 1
Grid3_num_rows = 7
Grid3_num_plots = 3

Grid3_plot_name(1) = 'TRho_Profile'
Grid3_plot_row(1) = 1
Grid3_plot_rowspan(1) = 3
Grid3_plot_col(1) = 1
Grid3_plot_colspan(1) = 1
Grid3_plot_pad_left(1) = 0.03
Grid3_plot_pad_right(1) = 0.03
Grid3_plot_pad_top(1) = 0.04
Grid3_plot_pad_bot(1) = 0.07
Grid3_txt_scale_factor(1) = 0.7

Grid3_plot_name(2) = 'Summary_Profile'
Grid3_plot_row(2) = 4
Grid3_plot_rowspan(2) = 2
Grid3_plot_col(2) = 1
Grid3_plot_colspan(2) = 1
Grid3_plot_pad_left(2) = 0.03
Grid3_plot_pad_right(2) = 0.03
Grid3_plot_pad_top(2) = 0.04
Grid3_plot_pad_bot(2) = 0.07
Grid3_txt_scale_factor(2) = 0.7

Grid3_plot_name(3) = 'Kipp'
Grid3_plot_row(3) = 6
Grid3_plot_rowspan(3) = 2
Grid3_plot_col(3) = 1
Grid3_plot_colspan(3) = 1
Grid3_plot_pad_left(3) = 0.03
Grid3_plot_pad_right(3) = 0.03
Grid3_plot_pad_top(3) = 0.04
Grid3_plot_pad_bot(3) = 0.07
Grid3_txt_scale_factor(3) = 0.7

File output

Grid3_file_flag = .false.
Grid3_file_dir = 'png'
Grid3_file_prefix = 'grid3_'
Grid3_file_interval = 5
Grid3_file_width = -1
Grid3_file_aspect_ratio = -1

Grid4

Grid4_win_flag = .false.

Grid4_win_width = 7
Grid4_win_aspect_ratio = 1

Grid4_xleft = 0.12
Grid4_xright = 0.95
Grid4_ybot = 0.08
Grid4_ytop = 0.92
Grid4_title = ''

Grid4_plot_name(:) = ''
Grid4_plot_row(:) = 1
Grid4_plot_rowspan(:) = 1
Grid4_plot_col(:) = 1
Grid4_plot_colspan(:) = 1
Grid4_plot_pad_left(:) = 0.0
Grid4_plot_pad_right(:) = 0.0
Grid4_plot_pad_top(:) = 0.0
Grid4_plot_pad_bot(:) = 0.0
Grid4_txt_scale_factor(:) = 0.7

set default

Grid4_num_cols = 10
Grid4_num_rows = 9
Grid4_num_plots = 6

Grid4_plot_name(1) = 'TRho_Profile'
Grid4_plot_row(1) = 1
Grid4_plot_rowspan(1) = 3
Grid4_plot_col(1) = 1
Grid4_plot_colspan(1) = 5
Grid4_plot_pad_left(1) = 0.0
Grid4_plot_pad_right(1) = 0.09
Grid4_plot_pad_top(1) = 0.0
Grid4_plot_pad_bot(1) = 0.1
Grid4_txt_scale_factor(1) = 0.7

Grid4_plot_name(2) = 'Summary_Profile'
Grid4_plot_row(2) = 1
Grid4_plot_rowspan(2) = 3
Grid4_plot_col(2) = 6
Grid4_plot_colspan(2) = 5
Grid4_plot_pad_left(2) = 0.00
Grid4_plot_pad_right(2) = 0.09
Grid4_plot_pad_top(2) = 0.0
Grid4_plot_pad_bot(2) = 0.1
Grid4_txt_scale_factor(2) = 0.7

Grid4_plot_name(3) = 'HR'
Grid4_plot_row(3) = 4
Grid4_plot_rowspan(3) = 2
Grid4_plot_col(3) = 1
Grid4_plot_colspan(3) = 2
Grid4_plot_pad_left(3) = 0.0
Grid4_plot_pad_right(3) = 0.01
Grid4_plot_pad_top(3) = 0.03
Grid4_plot_pad_bot(3) = 0.07
Grid4_txt_scale_factor(3) = 0.65

Grid4_plot_name(4) = 'TRho'
Grid4_plot_row(4) = 6
Grid4_plot_rowspan(4) = 2
Grid4_plot_col(4) = 1
Grid4_plot_colspan(4) = 2
Grid4_plot_pad_left(4) = 0.0
Grid4_plot_pad_right(4) = 0.01
Grid4_plot_pad_top(4) = 0.04
Grid4_plot_pad_bot(4) = 0.06
Grid4_txt_scale_factor(4) = 0.65

Grid4_plot_name(5) = 'Kipp'
Grid4_plot_row(5) = 4
Grid4_plot_rowspan(5) = 4
Grid4_plot_col(5) = 3
Grid4_plot_colspan(5) = 7
Grid4_plot_pad_left(5) = 0.09
Grid4_plot_pad_right(5) = 0.0
Grid4_plot_pad_top(5) = 0.03
Grid4_plot_pad_bot(5) = 0.06
Grid4_txt_scale_factor(5) = 0.7

Grid4_plot_name(6) = 'Text_Summary1'
Grid4_plot_row(6) = 8
Grid4_plot_rowspan(6) = 2
Grid4_plot_col(6) = 1
Grid4_plot_colspan(6) = 10
Grid4_plot_pad_left(6) = -0.08
Grid4_plot_pad_right(6) = 0.0
Grid4_plot_pad_top(6) = 0.03
Grid4_plot_pad_bot(6) = 0.0
Grid4_txt_scale_factor(6) = 0.17

File output

Grid4_file_flag = .false.
Grid4_file_dir = 'png'
Grid4_file_prefix = 'grid4_'
Grid4_file_interval = 5
Grid4_file_width = -1
Grid4_file_aspect_ratio = -1

Grid5

Grid5_win_flag = .false.

Grid5_win_width = 7
Grid5_win_aspect_ratio = 1

Grid5_xleft = 0.12
Grid5_xright = 0.95
Grid5_ybot = 0.08
Grid5_ytop = 0.92
Grid5_title = ''

Grid5_plot_name(:) = ''
Grid5_plot_row(:) = 1
Grid5_plot_rowspan(:) = 1
Grid5_plot_col(:) = 1
Grid5_plot_colspan(:) = 1
Grid5_plot_pad_left(:) = 0.0
Grid5_plot_pad_right(:) = 0.0
Grid5_plot_pad_top(:) = 0.0
Grid5_plot_pad_bot(:) = 0.0
Grid5_txt_scale_factor(:) = 0.7

set default

Grid5_num_cols = 10
Grid5_num_rows = 7
Grid5_num_plots = 5

Grid5_plot_name(1) = 'TRho_Profile'
Grid5_plot_row(1) = 1
Grid5_plot_rowspan(1) = 3
Grid5_plot_col(1) = 1
Grid5_plot_colspan(1) = 5
Grid5_plot_pad_left(1) = 0.0
Grid5_plot_pad_right(1) = 0.09
Grid5_plot_pad_top(1) = 0.0
Grid5_plot_pad_bot(1) = 0.1
Grid5_txt_scale_factor(1) = 0.7

Grid5_plot_name(2) = 'Summary_Profile'
Grid5_plot_row(2) = 1
Grid5_plot_rowspan(2) = 3
Grid5_plot_col(2) = 6
Grid5_plot_colspan(2) = 5
Grid5_plot_pad_left(2) = 0.00
Grid5_plot_pad_right(2) = 0.09
Grid5_plot_pad_top(2) = 0.0
Grid5_plot_pad_bot(2) = 0.1
Grid5_txt_scale_factor(2) = 0.7

Grid5_plot_name(3) = 'HR'
Grid5_plot_row(3) = 4
Grid5_plot_rowspan(3) = 2
Grid5_plot_col(3) = 1
Grid5_plot_colspan(3) = 2
Grid5_plot_pad_left(3) = 0.0
Grid5_plot_pad_right(3) = 0.01
Grid5_plot_pad_top(3) = 0.03
Grid5_plot_pad_bot(3) = 0.07
Grid5_txt_scale_factor(3) = 0.65

Grid5_plot_name(4) = 'TRho'
Grid5_plot_row(4) = 6
Grid5_plot_rowspan(4) = 2
Grid5_plot_col(4) = 1
Grid5_plot_colspan(4) = 2
Grid5_plot_pad_left(4) = 0.0
Grid5_plot_pad_right(4) = 0.01
Grid5_plot_pad_top(4) = 0.04
Grid5_plot_pad_bot(4) = 0.06
Grid5_txt_scale_factor(4) = 0.65

Grid5_plot_name(5) = 'Kipp'
Grid5_plot_row(5) = 4
Grid5_plot_rowspan(5) = 4
Grid5_plot_col(5) = 3
Grid5_plot_colspan(5) = 7
Grid5_plot_pad_left(5) = 0.09
Grid5_plot_pad_right(5) = 0.0
Grid5_plot_pad_top(5) = 0.03
Grid5_plot_pad_bot(5) = 0.06
Grid5_txt_scale_factor(5) = 0.7

File output

Grid5_file_flag = .false.
Grid5_file_dir = 'png'
Grid5_file_prefix = 'grid5_'
Grid5_file_interval = 5
Grid5_file_width = -1
Grid5_file_aspect_ratio = -1

Grid6

Grid6_win_flag = .false.

Grid6_win_width = 9
Grid6_win_aspect_ratio = 0.7

Grid6_xleft = 0.12
Grid6_xright = 0.95
Grid6_ybot = 0.08
Grid6_ytop = 0.89
Grid6_title = ''

Grid6_num_cols = 1
Grid6_num_rows = 1
Grid6_num_plots = 1

Grid6_plot_name(:) = ''
Grid6_plot_row(:) = 1
Grid6_plot_rowspan(:) = 1
Grid6_plot_col(:) = 1
Grid6_plot_colspan(:) = 1
Grid6_plot_pad_left(:) = 0.0
Grid6_plot_pad_right(:) = 0.03
Grid6_plot_pad_top(:) = 0.0
Grid6_plot_pad_bot(:) = 0.09
Grid6_txt_scale_factor(:) = 0.7

set default

Grid6_num_cols = 3
Grid6_num_rows = 3
Grid6_num_plots = 5

Grid6_plot_name(1) = 'Summary_Burn'
Grid6_plot_row(1) = 1
Grid6_plot_rowspan(1) = 1
Grid6_plot_col(1) = 2
Grid6_plot_colspan(1) = 2
Grid6_plot_pad_left(1) = 0.03
Grid6_plot_pad_right(1) = 0.06
Grid6_plot_pad_top(1) = 0.0
Grid6_plot_pad_bot(1) = 0.06
Grid6_txt_scale_factor(1) = 0.7

Grid6_plot_name(2) = 'Abundance'
Grid6_plot_row(2) = 2
Grid6_plot_rowspan(2) = 1
Grid6_plot_col(2) = 2
Grid6_plot_colspan(2) = 2
Grid6_plot_pad_left(2) = 0.03
Grid6_plot_pad_right(2) = 0.06
Grid6_plot_pad_top(2) = 0.06
Grid6_plot_pad_bot(2) = 0.00
Grid6_txt_scale_factor(2) = 0.7

Grid6_plot_name(3) = 'HR'
Grid6_plot_row(3) = 1
Grid6_plot_rowspan(3) = 1
Grid6_plot_col(3) = 1
Grid6_plot_colspan(3) = 1
Grid6_plot_pad_left(3) = 0.00
Grid6_plot_pad_right(3) = 0.09
Grid6_plot_pad_top(3) = 0.00
Grid6_plot_pad_bot(3) = 0.06
Grid6_txt_scale_factor(3) = 0.65

Grid6_plot_name(4) = 'TRho'
Grid6_plot_row(4) = 2
Grid6_plot_rowspan(4) = 1
Grid6_plot_col(4) = 1
Grid6_plot_colspan(4) = 1
Grid6_plot_pad_left(4) = 0.00
Grid6_plot_pad_right(4) = 0.09
Grid6_plot_pad_top(4) = 0.06
Grid6_plot_pad_bot(4) = 0.00
Grid6_txt_scale_factor(4) = 0.65

Grid6_plot_name(5) = 'Text_Summary1'
Grid6_plot_row(5) = 3
Grid6_plot_rowspan(5) = 1
Grid6_plot_col(5) = 1
Grid6_plot_colspan(5) = 3
Grid6_plot_pad_left(5) = -0.07
Grid6_plot_pad_right(5) = -0.02
Grid6_plot_pad_top(5) = 0.1
Grid6_plot_pad_bot(5) = 0.00
Grid6_txt_scale_factor(5) = 0.21

File output

Grid6_file_flag = .false.
Grid6_file_dir = 'png'
Grid6_file_prefix = 'grid6_'
Grid6_file_interval = 5
Grid6_file_width = -1
Grid6_file_aspect_ratio = -1

Grid7

Grid7_win_flag = .false.

Grid7_win_width = 6
Grid7_win_aspect_ratio = 1.5

Grid7_xleft = 0.12
Grid7_xright = 0.95
Grid7_ybot = 0.08
Grid7_ytop = 0.91
Grid7_title = ''

Grid7_num_cols = 1
Grid7_num_rows = 1
Grid7_num_plots = 1

Grid7_plot_name(:) = ''
Grid7_plot_row(:) = 1
Grid7_plot_rowspan(:) = 1
Grid7_plot_col(:) = 1
Grid7_plot_colspan(:) = 1
Grid7_plot_pad_left(:) = 0.0
Grid7_plot_pad_right(:) = 0.0
Grid7_plot_pad_top(:) = 0.0
Grid7_plot_pad_bot(:) = 0.0
Grid7_txt_scale_factor(:) = 0.9

set default

Grid7_num_cols = 1
Grid7_num_rows = 3
Grid7_num_plots = 3

Grid7_plot_name(1) = 'Abundance'
Grid7_plot_row(1) = 1
Grid7_plot_rowspan(1) = 1
Grid7_plot_col(1) = 1
Grid7_plot_colspan(1) = 1
Grid7_plot_pad_left(1) = 0.03
Grid7_plot_pad_right(1) = 0.08
Grid7_plot_pad_top(1) = 0.00
Grid7_plot_pad_bot(1) = 0.06
Grid7_txt_scale_factor(1) = 0.9

Grid7_plot_name(2) = 'TRho'
Grid7_plot_row(2) = 2
Grid7_plot_rowspan(2) = 1
Grid7_plot_col(2) = 1
Grid7_plot_colspan(2) = 1
Grid7_plot_pad_left(2) = 0.03
Grid7_plot_pad_right(2) = 0.08
Grid7_plot_pad_top(2) = 0.06
Grid7_plot_pad_bot(2) = 0.00
Grid7_txt_scale_factor(2) = 0.9

Grid7_plot_name(3) = 'Text_Summary1'
Grid7_plot_row(3) = 3
Grid7_plot_rowspan(3) = 1
Grid7_plot_col(3) = 1
Grid7_plot_colspan(3) = 1
Grid7_plot_pad_left(3) = -0.08
Grid7_plot_pad_right(3) = 0.0
Grid7_plot_pad_top(3) = 0.1
Grid7_plot_pad_bot(3) = 0.0
Grid7_txt_scale_factor(3) = 0.16

File output

Grid7_file_flag = .false.
Grid7_file_dir = 'png'
Grid7_file_prefix = 'grid7_'
Grid7_file_interval = 5
Grid7_file_width = -1
Grid7_file_aspect_ratio = -1

Grid8

Grid8_win_flag = .false.

Grid8_win_width = 7
Grid8_win_aspect_ratio = 1.2

Grid8_xleft = 0.12
Grid8_xright = 0.95
Grid8_ybot = 0.08
Grid8_ytop = 0.91
Grid8_title = ''

Grid8_num_cols = 1
Grid8_num_rows = 1
Grid8_num_plots = 1

Grid8_plot_name(:) = ''
Grid8_plot_row(:) = 1
Grid8_plot_rowspan(:) = 1
Grid8_plot_col(:) = 1
Grid8_plot_colspan(:) = 1
Grid8_plot_pad_left(:) = 0.0
Grid8_plot_pad_right(:) = 0.03
Grid8_plot_pad_top(:) = 0.0
Grid8_plot_pad_bot(:) = 0.09
Grid8_txt_scale_factor(:) = 0.7

set default

Grid8_num_cols = 3
Grid8_num_rows = 14
Grid8_num_plots = 6

Grid8_plot_name(1) = 'Summary_Burn'
Grid8_plot_row(1) = 1
Grid8_plot_rowspan(1) = 4
Grid8_plot_col(1) = 1
Grid8_plot_colspan(1) = 3
Grid8_plot_pad_left(1) = 0.0
Grid8_plot_pad_right(1) = 0.06
Grid8_plot_pad_top(1) = 0.0
Grid8_plot_pad_bot(1) = 0.09
Grid8_txt_scale_factor(1) = 0.7

Grid8_plot_name(2) = 'Abundance'
Grid8_plot_row(2) = 5
Grid8_plot_rowspan(2) = 4
Grid8_plot_col(2) = 1
Grid8_plot_colspan(2) = 3
Grid8_plot_pad_left(2) = 0.0
Grid8_plot_pad_right(2) = 0.06
Grid8_plot_pad_top(2) = 0.0
Grid8_plot_pad_bot(2) = 0.05
Grid8_txt_scale_factor(2) = 0.7

Grid8_plot_name(3) = 'HR'
Grid8_plot_row(3) = 9
Grid8_plot_rowspan(3) = 3
Grid8_plot_col(3) = 1
Grid8_plot_colspan(3) = 1
Grid8_plot_pad_left(3) = 0.00
Grid8_plot_pad_right(3) = 0.1133
Grid8_plot_pad_top(3) = 0.05
Grid8_plot_pad_bot(3) = 0.0
Grid8_txt_scale_factor(3) = 0.65

Grid8_plot_name(4) = 'TRho'
Grid8_plot_row(4) = 9
Grid8_plot_rowspan(4) = 3
Grid8_plot_col(4) = 2
Grid8_plot_colspan(4) = 1
Grid8_plot_pad_left(4) = 0.0267
Grid8_plot_pad_right(4) = 0.0867
Grid8_plot_pad_top(4) = 0.05
Grid8_plot_pad_bot(4) = 0.0
Grid8_txt_scale_factor(4) = 0.65

Grid8_plot_name(5) = 'TRho_Profile'
Grid8_plot_row(5) = 9
Grid8_plot_rowspan(5) = 3
Grid8_plot_col(5) = 3
Grid8_plot_colspan(5) = 1
Grid8_plot_pad_left(5) = 0.0533
Grid8_plot_pad_right(5) = 0.06
Grid8_plot_pad_top(5) = 0.05
Grid8_plot_pad_bot(5) = 0.0
Grid8_txt_scale_factor(5) = 0.7

Grid8_plot_name(6) = 'Text_Summary1'
Grid8_plot_row(6) = 12
Grid8_plot_rowspan(6) = 3
Grid8_plot_col(6) = 1
Grid8_plot_colspan(6) = 3
Grid8_plot_pad_left(6) = -0.08
Grid8_plot_pad_right(6) = 0.0
Grid8_plot_pad_top(6) = 0.06
Grid8_plot_pad_bot(6) = 0.0
Grid8_txt_scale_factor(6) = 0.16

File output

Grid8_file_flag = .false.
Grid8_file_dir = 'png'
Grid8_file_prefix = 'grid8_'
Grid8_file_interval = 5
Grid8_file_width = -1
Grid8_file_aspect_ratio = -1

Grid9

Grid9_win_flag = .false.

Grid9_win_width = 7
Grid9_win_aspect_ratio = 0.8

Grid9_xleft = 0.15
Grid9_xright = 0.85
Grid9_ybot = 0.12
Grid9_ytop = 0.91
Grid9_title = ''

Grid9_num_cols = 1
Grid9_num_rows = 1
Grid9_num_plots = 1

Grid9_plot_name(:) = ''
Grid9_plot_row(:) = 1
Grid9_plot_rowspan(:) = 1
Grid9_plot_col(:) = 1
Grid9_plot_colspan(:) = 1
Grid9_plot_pad_left(:) = 0.0
Grid9_plot_pad_right(:) = 0.0
Grid9_plot_pad_top(:) = 0.0
Grid9_plot_pad_bot(:) = 0.0
Grid9_txt_scale_factor(:) = 0.7

set default

Grid9_num_cols = 3
Grid9_num_rows = 11
Grid9_num_plots = 5

Grid9_plot_name(1) = 'Abundance'
Grid9_plot_row(1) = 1
Grid9_plot_rowspan(1) = 5
Grid9_plot_col(1) = 1
Grid9_plot_colspan(1) = 3
Grid9_plot_pad_left(1) = 0.0
Grid9_plot_pad_right(1) = 0.06
Grid9_plot_pad_top(1) = 0.0
Grid9_plot_pad_bot(1) = 0.09
Grid9_txt_scale_factor(1) = 0.7

Grid9_plot_name(2) = 'HR'
Grid9_plot_row(2) = 6
Grid9_plot_rowspan(2) = 3
Grid9_plot_col(2) = 1
Grid9_plot_colspan(2) = 1
Grid9_plot_pad_left(2) = 0.00
Grid9_plot_pad_right(2) = 0.1133
Grid9_plot_pad_top(2) = 0.05
Grid9_plot_pad_bot(2) = 0.01
Grid9_txt_scale_factor(2) = 0.65

Grid9_plot_name(3) = 'TRho'
Grid9_plot_row(3) = 6
Grid9_plot_rowspan(3) = 3
Grid9_plot_col(3) = 2
Grid9_plot_colspan(3) = 1
Grid9_plot_pad_left(3) = 0.0267
Grid9_plot_pad_right(3) = 0.0867
Grid9_plot_pad_top(3) = 0.05
Grid9_plot_pad_bot(3) = 0.01
Grid9_txt_scale_factor(3) = 0.65

Grid9_plot_name(4) = 'TRho_Profile'
Grid9_plot_row(4) = 6
Grid9_plot_rowspan(4) = 3
Grid9_plot_col(4) = 3
Grid9_plot_colspan(4) = 1
Grid9_plot_pad_left(4) = 0.0533
Grid9_plot_pad_right(4) = 0.06
Grid9_plot_pad_top(4) = 0.05
Grid9_plot_pad_bot(4) = 0.01
Grid9_txt_scale_factor(4) = 0.7

Grid9_plot_name(5) = 'Text_Summary1'
Grid9_plot_row(5) = 9
Grid9_plot_rowspan(5) = 3
Grid9_plot_col(5) = 1
Grid9_plot_colspan(5) = 3
Grid9_plot_pad_left(5) = -0.08
Grid9_plot_pad_right(5) = 0.0
Grid9_plot_pad_top(5) = 0.08
Grid9_plot_pad_bot(5) = 0.0
Grid9_txt_scale_factor(5) = 0.14

File output

Grid9_file_flag = .false.
Grid9_file_dir = 'png'
Grid9_file_prefix = 'grid9_'
Grid9_file_interval = 5
Grid9_file_width = -1
Grid9_file_aspect_ratio = -1

Annotation

“annotation” strings – provide args for PGMTXT

Write text at a position specified relative to the viewport (outside or inside). The text is written using the current values of attributes color-index, line-width, character-height, and character-font.

• SIDE : must include one of the characters ‘B’, ‘L’, ‘T’, or ‘R’ signifying the Bottom, Left, Top, or Right margin of the viewport. If it includes ‘LV’ or ‘RV’, the string is written perpendicular to the frame rather than parallel to it.

• DISP : the displacement of the character string from the specified edge of the viewport, measured outwards from the viewport in units of the character height. Use a negative value to write inside the viewport, a positive value to write outside.

• COORD : the location of the character string along the specified edge of the viewport, as a fraction of the length of the edge.

• FJUST : controls justification of the string parallel to the specified edge of the viewport. If FJUST = 0.0, the left-hand end of the string will be placed at COORD; if JUST = 0.5, the center of the string will be placed at COORD; if JUST = 1.0, the right-hand end of the string will be placed at at COORD.

annotation1_ci = 1
annotation1_ch = 1
annotation1_lw = 1
annotation1_cf = 1
annotation1_side = 'T'
annotation1_disp = 0
annotation1_coord = 0
annotation1_fjust = 0.0
annotation1_text = ''

annotation2_ci = 1
annotation2_ch = 1
annotation2_lw = 1
annotation2_cf = 1
annotation2_side = 'T'
annotation2_disp = 0
annotation2_coord = 0
annotation2_fjust = 0.0
annotation2_text = ''

annotation3_ci = 1
annotation3_ch = 1
annotation3_lw = 1
annotation3_cf = 1
annotation3_side = 'T'
annotation3_disp = 0
annotation3_coord = 0
annotation3_fjust = 0.0
annotation3_text = ''

pgstar_extras

the PGSTAR extras work the same as for the star controls

read_extra_pgstar_inlist(:) = .false.
extra_pgstar_inlist_name(:) = 'undefined'

if read_extra_pgstar_inlist(i) is true, then read &pgstar from this namelist file